Valonvahvistimien osat ja tarvikkeet
Tärkeimmät lisävarusteet saadaksesi kaiken irti yönäkölaitteistasi aina linssinsuojaimista tee-se-itse-runkoihin.
Showing all 16 results
-
100,00 €The Aluminum PVS14 NVG J Arm with NVG Interface Shoe provides a durable connection for mounting an AN/PVS-14 monocular to a NVG mount. It can be easily mounted and dismounted from the AN/PVS-14 monocular by means of a thumb screw, and allows the operator to select the height and angle for comfort with the ability to make fine adjustments to the arm. 110 degrees of motion accommodates right or left eye dominance. This Mounting Arm is only compatible with the AN/PVS-14 series of night vision monoculars and utilizes a dovetail interface.
-
175,00 €The Aluminium Night Vision Goggle Mount is designed to the be lowest possible profile of any removable NVG mount on the market in both the active and stowed positions.
Mount have user-adjustable dovetail shoe to fit off-spec devices including increased overall fore/aft rail travel places nigh vision googles substantially closer to the user’s eye and farther out to accommodate for gas masks and other eyewear compared to industry mounts such as the Wilcox G24 (~2 inches of travel). Ergonomic “one touch” spring-loaded height adjustment allows operator to adjust height with one hand. Also six position adjustable mounting plate fits numerous facial profiles and helmet mounting systems.
-
2 500,00 €This kit includes all parts needed to assemble a Katana Ruggadized Night Vision Binocular (minus the image intensifier tube).
The Ultralight Articulating Night Vision Binocular – Katana Ruggedized (UANVB-R) “Katana Ruggadized” is the one of the lightest aluminium housing binocular on the market to-date at a functional weight of 530g complete with standard milspec optics and battery installed.
*** Image intensifier tube is not included ***
-
2 900,00 €This kit includes all parts needed to assemble a Manticore-Ruggedized Night Vision Binocular (minus the image intensifier tube).
The Ultralight Articulating Night Vision Binocular – Full Control Ruggedized (UANVB-FCR) “Manticore-Ruggedized” is a articulating binocular housing made of high strength aerospace grade 7075-T6 aluminum with a full suite of onboard digital controls.
*** Image intensifier tube is not included ***
-
2 000,00 €This kit includes all parts needed to assemble a PVS-14 Night Vision Monocular (minus the image intensifier tube).
The Vyper monocular system is a heavily ruggedized system used by the soldier, law enforcement officer, hunter or rancher when operating in harsh, heavy usage environments.
The Vyper monocular system, when paired with the Photonis Defense 4G image tube achieves MILSPEC performance. When the Vyper is integrated with the Photonis Defense ECHO image tube, the system provides near MILSPEC performance at a commercial price point.
Included in delivery:
- Photonis Defense Vyper™ monocular
- Soft carrying bag w/ shoulder strap,
- Demist shield
- Lens cleaning device
- Sacrificial filter
- J-Arm Assembly (Helmet Mount Adapter)
*** Image intensifier tube is not included ***
-
1 400,00 €This kit includes all parts needed to assemble a PVS-14 Night Vision Monocular (minus the image intensifier tube).
The PVS-14 US Milspec Monocular Night Vision Device features a complete night vision monocular in US Mil-Spec housing assembly with US Mil-Spec lens (Carson/Noctis) providing an high level of performance to price ratio.
Included in delivery:
- AN/PVS-14A Standard night vision monocular
- Soft Carrying case
- Objective Lens Covers
- Rubber Eyecup
- Sacrificial windows
- Demist shields
- Lens tissue
- J-arm (horn model)
- Headmount
- Operator’s manual
*** Image intensifier tube is not included ***
-
250,00 €Textile carrier for NVG devices
Special scenarios or activities with limited visibility require equipment that allows night vision devices to be used without the helmet.
For this purpose, Hexonia have developed a lightweight headgear made of a textile 3D mesh with an integrated mount for night vision devices. The material ensures good ventilation and low moisture absorption and prevents pressure points.
-
120,00 €Suosittelemme, että valonvahvistimien tiiveys tarkastetaan kerran vuodessa ja laite huuhdellaan sekä täytetään typellä. Typpitäyttö poistaa laitteen sisältä kosteuden ja epäpuhtaudet, jotka voivat aiheuttaa valonvahvistinyksikön vaurioitumisen ajan saatossa.
-
90,00 €The Adjustable IRIS Aperture is designed to offer end users reliable protection and enable full use of their Night Vision Devices. Built out of durable 6061 T6 Aluminum, the Adjustable IRIS Aperture is ready to take abuse. Securing to the NVG objective lens via threads, the Adjustable IRIS Aperture will not run the risk of popping off. The Adjustable IRIS Aperture features a polycarbonate sacrificial lens to keep your NVG objective lens from being scratched or damaged as well.
Additionally, the Adjustable IRIS Aperture offers huge levels of focal adjustment. With the turn of the Adjustable IRIS Aperture bezel, you can adjust the from 22.0mm down to 1.5mm. Adjustable IRIS Aperture system gives you the perfect balance of adjustability and utility. -
40,00 €Low profile PVS-14 sacrificial lenses/windows provide a layer of protection against scratches, dust, dirt, and other debris. Low profile sacrificial lenses will fit any device equipped with standard PVS-14 pattern glass. We opted for a high transmission impact and scratch-resistant polycarbonate to keep weight to a minimum, while protruding as little as possible.
Pinhole covers (Day Filter) can fit over low profile sacrificial lens. Installation is quick and easy; simply thread Low Profile Sacrificial Lenses into the lenses of your device and you’re good to go.
Compatible with Standard PVS-14 pattern lenses (Noctis Technologies, Elbit, and other Mil-Spec lenses).
-
390,00 €Tailored for PVS-14 and Jerry-YM/PFN, MLB mount prioritizes device-specific precision, ensuring minimalism, lightweight design, and cost-effectiveness.
-
Ask for detailsThe Night Vision Upgrade Service is a fantastic way to take your existing NVGs and upgrade the image intensifier tubes or housing to the latest and most state-of-the-art technology.
With our Night Vision Upgrade Service, you can replace the IIT or housing in your current NVGs with any of ITTs or housing that we offer to your customers. Responding to budget-minded operator requests, you can save on the cost of a new night vision device by upgrading your existing NVGs.
Contact for details info@pautac.fi
-
40,00 €The Polymer PVS14 NVG J Arm with NVG Interface Shoe provides a durable connection for mounting an AN/PVS-14 monocular to a NVG mount. It can be easily mounted and dismounted from the AN/PVS-14 monocular, and allows the operator to select the height and angle for comfort with the ability to make fine adjustments to the arm. 110 degrees of motion accommodates right or left eye dominance. This Mounting Arm is only compatible with the AN/PVS-14 series of night vision monoculars and utilizes a dovetail interface.
-
40,00 €Cost effective polymer PVS-14 bridge. Users can selectively adjust the goggle’s field of view from 40 to approximately 70 degrees by laterally rotating (or “panning”) each individual monocular outward, creating a panoramic image. With an locking adjustable mechanism and resulting wide-view image, you can enjoy vastly improved situational awareness and the feeling like you’re not even looking through image intensifying tubes.
-
470,00 €The Bat pack will provide auxiliary power to your binocular device using 4x CR123A’s for a total runtime of 96 hours. The power switch allows the user to switch between the 2 different power banks which each hold two CR123A’s. It uses a Fischer 4-pin port on the side of the pack and can come with a Fischer to LEMO 4-pin 0B LEMO cable which is the standard port on a UANVB Katana, or a Fischer to LEMO 5-pin 00B LEMO cable which is standard for the Daisho, and any of the ruggedized series goggles.
The Bat Pack will also come with shock cord and two Tegris tabs to allow users to add positive retention to the battery pack by attaching it to their rear helmet bolts.
-
200,00 €This Mil-spec PVS-14 Weapon’s Mount allows you to attach your monocular to any MIL-STD-1913/Nato Accessory Rail Picatinny rail.