Spuhr ISMS Rail Interfaces

60,00 

Picatinny interfaces for attaching 3rd party accessories with Picatinny to the ISMS scope mount.

Product total
Options total
Grand total
Tuotetunnus (SKU): Spuhr Rail Osasto: Avainsanat tuotteelle , , , Product ID: 6520

Kuvaus

Features

Article no.: A-0003

Picatinny Rail for Spuhr interface. Includes screws.
Height: 10 mm/0.39”
Length: 55 mm/2.16”
Weight: 18 g/0.6 oz

Article no.: A-0012

Picatinny Rail for Spuhr interface. Includes screws.
Height: 10 mm/0.39”
Length: 35 mm/1.38”
Weight: 14 g/0.5 oz

Article no.: A-0032

Picatinny interface for attaching 3rd party accessories with Picatinny clamps to the ISMS scope mount. Includes screws.
Height: 14 mm/0.55”
Length: 75 mm/2.95”
Weight: 31 g/1.1 oz

Article no.: A-0037

Picatinny interface for attaching 3rd party accessories with Picatinny clamps to the ISMS scope mount. Includes screws.
Height: 20 mm/0.79”
Length: 75 mm/2.95”
Weight: 32 g/1.1 oz

Article no.: A-0019D

Lowest interface for attaching Wilcox RAPTAR and RAPTAR-S laser range finders with Picatinny risers to an ISMS scope mount. Includes screws.
Height: 14 mm/.55”
Length: 85 mm/3.35” (Picatinny Rail)
Weight: 31 g/1.1 oz

Note: The A-0019D is not compatible with the S&B Ultra Short scopes as the adapter will come in contact with the objective bell.

Article no.: A-0029

Interface for attaching Wilcox RAPTAR, RAPTAR-S (Gen2,) RAPTAR Lite ES, or SilencerCo RADIUS laser range finder to ISMS scope mount. Includes screws.
Height: 25 mm/.984”
Length: 85 mm/3.346” (Picatinny Rail)
Weight: 42 g/1.5 oz

Note: For direct mounting the Gen1 RAPTAR-S without Picatinny clamp/riser use the A-0029C Gen1 Wilcox RAPTAR-S Adapter.

Article no.: A-0029B

Interface for attaching Wilcox RAPTAR, RAPTAR-S (Gen2,) RAPTAR Lite ES or SilencerCo RADIUS laser range finder to ISMS scope mount or spotting scope ring. Includes screws.
Height: 35 mm/1.38”
Length: 123 mm/4.86”
Length: 104 mm/4.095” (Picatinny Rail)
Weight: 59 g/2.1 oz

Note: For direct mounting the Gen1 RAPTAR-S without Picatinny clamp/riser use the A-0029C Gen1 Wilcox RAPTAR-S Adapter.

Article no.: A-0090

Interface for attaching 3rd party accessories with Picatinny clamps to the top and sides of a 34 mm ISMS scope mount.
Fits around the front ring on 34 mm mounts. Includes screws.
Length: 70 mm/2.76”
Weight: 146 g/5.2 oz
Note: 34 mm mounts only.