Kuvaus
Aesthetics:
Please note that our foldable buttstock follows the classic lines of the TRG-21/41 and the lines of the grip panels do not blend perfectly into the forend. We recommend that you take a look at the image gallery to get a better idea.
Installation onto your TRG:
Simple, requiring removal and re-installation of two screws. Entire assembly can be swapped to over to the Whiskey-3 Chassis if you desire (if, for example, you have a W3C for the Tikka T3 in a fixed configuration, you can bolt on this folding stock in place of the fixed back end).
Foldable Stock Mechanism (not applicable for fixed stock):
Main latch uses proven tapered lever style lockup. Secondary latch locks buttstock in folded position. Spring loaded plungers lock automatically. Tapered design of primary latch allows tight lockup through wear of the system. Latch components made of hardened stainless steel and nitrided high strength chromoly steel.
Cheekpiece:
Infinitely adjustable within range (1” travel). You are not locked into set positions. Cheekpiece can be quickly removed and re-installed, uses a clamp and thumbscrew design. Includes a simple feature to make the cheekpiece return to the exact height you set it. Cheekpiece can be moved forward and backward with several mounting positions. Cheekpiece made of polymer to not transmit heat to or away from your face.
Length of Pull:
Adjustable in ¼” increments with 1 3/4” of adjustment range. LOP range varies slightly between versions but is roughly 13.3” to 15”. Uses cam lock and thumbscrew to ensure a solid fit.
Buttstock:
CNC milled from billet aluminum. Entire buttstock assembly can be mounted to KRG chassis X-ray, Bravo, 180-Xray for CZ455, and also Sako TRG-22/42 rifle.
Buttpad:
Moves vertically to set positions within range. Tool-less adjustable. Buttpad is Remington 700 pattern so user can install aftermarket pre-fit pads. Buttpad can tilt 15 degrees to each side (as if looking directly from the rear down the bore).
Mounting features for slings, monopods, etc:
Buttstock has QD sling cup on each side and provisions for other mounting options. Folding stock has one additional QD mount point built in. Buttstock includes bag rider which can be replaced with included picatinny rail.
Optional Accessories:
Several accessories available such as bag riders and grippy cheekpiece.
Materials/Finishes:
Most aluminum parts are hard anodized (Type III). All fasteners are stainless steel with black oxide coating. Steel parts are salt bath nitrided or stainless steel. Grip panels are injection molded reinforced polymer.
Weight:
Fixed version is ~ 2.5 lbs Folding version is ~ 2.9 lbs
Color:
Black/black Sako Green/black (see pictures)
