Description
Detailed info
The Whiskey-3 Chassis (W3C) (Generation 6 Chassis)Forend:
Polymer to keep your hand away from hot metal in the summer and cold metal in the winter Threaded mounting holes at various positions, total of 15-20. Access hole for action mounting screw, so you can remove the action without removing forend. Side mounting options for rail, flush mount QD sling plate, external QD cup, etc on both sides of forend. Ships with one QD cup on the left side.
“Backbone”/Chassis:
Utilizes radius bedding, which is CNC’d into aluminum backbone for consistent contact between action and chassis. Hardened stainless steel recoil lug instead of aluminum ones found on stock T3’s. Rem 700 version can accommodate most large aftermarket recoil lugs like the Badger Ordnance lug without any or with only slight modification. Designed for 5 or 10 round AICS magazines (with or without front spacer plate in T3, with spacer plate only in Rem 700 unless you have a modified action); Rem 700 LA now uses 3.850″ length AICS pattern magazines. Barrel contours accepted: 1.25″ for 4″ in front of action face, then 1.20″ straight to end of forend. A 1.25″ straight cylinder barrel will fit but we feel that the clearance is too minimal. We recommend using no larger than a varmint contour to keep proper balance.
Trigger Guard/Mag catch:
Rem 700 version will accept x-mark triggers and most aftermarket triggers though some may require modifications to the trigger or chassis. Mag catch is our new low profile version which reduces snags while still providing excellent ergonomics and control.
Buttstock:
CNC milled from billet aluminum. Entire buttstock assembly can be mounted to KRG chassis X-ray, Bravo, 180-Xray for CZ455, and also Sako TRG-22/42 rifle.
Buttpad:
Moves vertically to set positions within range. Tool-less adjustable. Buttpad is Remington 700 pattern so user can install aftermarket pre-fit pads. Buttpad can tilt 15 degrees to each side (as if looking directly from the rear down the bore).
Mounting features for slings, monopods, etc:
Buttstock has QD sling cup on each side and provisions for other mounting options. Folding stock has one additional QD mount point built in. Buttstock includes bag rider which can be replaced with included picatinny rail. Harris bipod stud included on forend. QD cups can be mounted on any number of positions on sides or bottom of forend.
Optional Accessories:
Large selection of accessories from sling mounts to tripod mounts. ALL STOCKS COME WITH ONE MOE L2 RAIL.
Materials/Finishes:
Most aluminum parts are hard anodized (Type III). All fasteners are stainless steel with black oxide coating. Steel parts are salt bath nitrided or stainless steel. Grip panels are injection molded reinforced polymer.
Weight:
Fixed version is ~ 3.8 lbs w/o magazine. Folding version is ~ 4.1 lbs w/0 magazine.
Color:
NOTES *Remington 700 Short Action Enclosed Forend version now ships with Arca Enclosed Forend.
*Not guarantee proper feeding with the KRG/Tikka T3/6.5PRC combo.
*The Tikka inlet accepts T3, T3x, and CTR versions, however slight mods may be required on the trigger-guard for the T3 TAC A1 to function properly. Tikka rifles accept AICS pattern mags with the exception of the Magpul AICS polymer mags.
*Actions with trigger hangers will not work without mods to the chassis, hanger, or both.
*Not guarantee the proper function of Vudoo V22 or Bergara B-14r (rimfire) magazines in our chassis. It may be necessary to install and fit our Extended Mag Catch for proper feeding.
*All of our chassis take AICS magazines with nothing extra needed, the magazine is not included.
*Remington 700 long action chassis take 3.850″ (CIP) length AICS pattern magazines or 3.715″ AICS mags with included spacer.
