Valikko Sulje

MDT

Showing 1–20 of 52 results

  • JAE Adjustable Bag Rider

    230,00 €

    ADJUSTABLE BAG RIDER allows you to set your angle and position to increase your stability while shooting prone or from a bench.

  • JAE Buttstock Spacer

    130,00 €

    Machined Butt Pad Spacer (1/4″ thick) to increase & personalize your LOP. Depending on how many Butt Spacers you use together, you may need longer bolts.

  • JAE M-LOK ARCA Rail 700

    250,00 €

    Uniquely designed M-LOK ARCA RAIL runs the full length of the forend, plus extends 2″ past the front of the chassis (ARCA-2) or 6″ past the front of the chassis (ARCA-6).

  • JAE M-LOK Picatinny Rail

    120,00 €

    M-LOK Picatinny Rails (in sizes 2″, 4″, or 8″) attach to the M-LOK FLUSH RAIL, M-LOK ARCA RAILS, and to the M-LOK SIDE RAIL ADAPTERS and allow you to attach Bipods or other 1913 PICATINNY RAIL Spec Accessories.

  • JAE Night Vision Mount

    350,00 €

    Night Vision Mount w/ 20 MOA Integral Rail for mounting Night Optics. Fits: All JAE-700 G4 Chassis (Original to G4) (Does NOT fit the JAE-100…

  • JAE Off Hand Rest

    150,00 €

    Hand Rest w/ Integral Picatinny Rail allows for attaching Monopod on rear and also adds support for non-trigger hand.

  • JAE-700 G5

    2 550,00 €

    NEW JAE-700 G5 CHASSIS (REM700 Short Action) has the strength & stabililty of a Chassis and the ergonomics & beauty of a traditional stock. Adjustable Magwell enables you to improve the feed on your mags so you can have confidence at a match or range.

  • MDT 20 MOA Scope Base

    90,00 €

    MDT’s Scope Base Picatinny Rails are a precise and reliable solution when it comes to mounting a scope on your bolt action rifle.

  • MDT ACC Premier Gen 2

    1 300,00 €

    An all-round refresh to the industry-defining ACC Premier. The ACC Premier GEN2 borrows improvements made with the ACC Elite.

  • MDT ACC Elite

    2 050,00 €

    The MDT ACC Elite ensures that top-tier shooters reach the podium. This is a perfect fusion of design, engineering, and industry expertise. The end result, a competition chassis that outperforms anything to date.

    Unmatched balance, recoil control, weight management, and utility, allow elite shooters to shave seconds off stage times and get more rounds on target.

  • MDT ACC Interior Forend Weights (5 pack)

    220,00 €

    Add internal weight to you MDT ACC Chassis.

  • MDT ACC Control Bridge

    140,00 €

    The MDT Control Bridge is an accessory designed for the ACC Elite chassis. It is intended to be bolted onto the top of the forend, serving as a mirage mitigation device and also functioning as a barrel cover when reaching over the forend to enhance recoil control.

  • MDT ACC Mirage Shield

    190,00 €

    The Mirage Shield/NV Bridge is a dual purpose, precision machined, add-on accessory for the MDT ACC chassis. While the main purpose of the mirage shield is to help mitigate mirage and maintain a clear view of your target in sustained strings of fire, it also provides the ability for hunters and operators to attach a night vision optic to their system. For competitors, the mirage shield also gives you better available surface to control the front of your rifle, without having to grab a hot barrel.

  • MDT ACC NV Bridge

    140,00 €

    The MDT ACC Elite NV Bridge is a Picatinny rail that securely attaches to the top of the forend, providing versatile mounting options for night vision, thermal imaging, prism/periscope, or other devices. Additionally, the NV Bridge assists in reducing mirage effects.

  • MDT Buttstock Weight

    70,00 €

    Add weight to your buttstock to decrease recoil and balance your rifle.

    This weight mounts in the lower pocket of the MDT ESS, ACC, and SRS V5 buttstocks. The weight and its hardware will add 0.65 lb to your rifle system. Attaching near the bottom of the stock will move your balance point rearward significantly.

    To install, remove the buttpad assembly, slide the weight into the lower pocket, attach with included screws and reinstall the buttpad assembly. The buttstock weight is a nice compliment to MDT M-LOK Exterior Forend Weights.

  • MDT CKYE-POD Gen 2

    750,00 €

    If you’re a hunter or a match shooter looking for a game-changing piece of gear, look no further than the MDT Bipod. Quality craftsmanship and fast, simple, one-handed adjustments make this bipod the ultimate platform for stability and versatility.

  • MDT Elite Cheek Piece

    40,00 €

    Replace your current MDT SRS (Skeleton RIfle Stock) cheek piece with the MDT Elite Cheek Piece featuring a more narrow profile cheek rest for better positioning when shooting weak side. This Elite Cheek Piece also comes with a 1/16″ neoprene foam pad on the surface for added comfort.

  • MDT ESS

    1 350,00 €

    The ESS (Elite Sniper System) provides ultimate ergonomics and features!

    The MDT ESS chassis is designed with its own buttstock for perfect ergonomics and is designed to use AR15 style pistol grips (purchased separately), and allows for customization with a wide variety of accessories.

    The ESS Chassis System includes chassis, buttstock and 15″ forend.

    Click here to customize buttstock, forend and rail options on your ESS.

  • MDT ESS Foregrip ARCA Adapter

    60,00 €

    Use your ESS Foregrip to attach to an ARCA adapter.

    Mil-spec Type III hard-black anodized aluminum ARCA adapters that attach over-top-of MDT ESS foregrips. Features an angled profile, that fits inside of the existing foregrip to allow infinite adjustment of Arca accessories along the 5” section. Up your ESS’ performance by quickly being able to shift bipods rearwards for awkward shots, or adapting to a tripod with ease and speed.

  • MDT ESS Scope Base

    120,00 €

    Install your optics seamlessly on your ESS chassis system bolt action rifle with our 20 MOA ESS Scope Base Rails.