Menu Close

Paukatti Oy assembles night vision devices in Finland from components of high-quality and well-known manufacturers. These products are thoroughly tested to ensure that they meet the technical requirements set for them and the needs of the end user. The company’s quality policy is as follows:

Paukatti Oy manufactures high-quality products that exceed customer expectations and are delivered on time.
The company develops new products and invests in continuous operational improvement and development.

Paukatti Oy have certificated quality management system that complies with the requirements of the standard ISO 9001:2015 what covers:

Optronics design, research, development and manufacturing.

Paukatti Oy has invested in the necessary equipment to assemble and maintain night vision devices to enable that capability. Our highly specialized equipment includes, but is not limited to:

  • Night Vision-specific assembly and cleaning tools
  • Digital dry nitrogen purging and vacuum system
  • 100+ PSI air blower to extract dust and debris from inside devices and on optical surfaces
  • Night vision binocular digital collimation tool
  • Night vision resolution tester
  • Diopter Telescope by Möller-Wedel

These tools allow us to assemble and maintain devices that are free from scratches and marring from improper tools, dust and debris inside housings and on the output screens and lenses, and over- or under-torqued fasteners.

Each device that leaves our facility will receive a documented report device’s performance and the readability. This provides full transparency and accountability of what each user is receiving and assurance that the device was assembled with the highest standards. Night vision devices are an investment into an extremely powerful capability. If assembled and maintained properly, these devices can and should be relied upon and provide years of reliable service.

IN HOUSE ASSEMBLY & MAINTENANCE

We offer the following services all completed in-house:

  • Night Vision Device complete disassembly, cleaning, re-assembly.
  • Purging with dry nitrogen at or above US Mil MOS 39E standards
  • Testing and collimation of binoculars.
  • Diopter calibration
  • High and Low-light resolution testing
  • Eyepiece focus adjustment
  • Infinity focus adjustment
  • Conversion of manual-gain image intensifier tubes to auto-gain (MX-11769 to MX-10160)

We have experience with the following devices:

  • Act in Black DTNVS
  • Act in Black DTNVG
  • Nocturn Industries Katana, Katana-R
  • Nocturn Industries Tanto
  • Nocturn Industries Manticore-R
  • Argus BNVD-1431 MK1 and MK2
  • AN/PVS-7
  • AN/PVS-14
  • AN/PVS-15
  • AN/PVS-31C
  • AB Night Vision RNVG
  • AB Night Vision RNVG-A
  • AB Night Vision RPNVG
  • AB Night Vision RVM-14
  • Boson Proton MNVG
  • AB Night Vision Mod3 and Mod3B
  • Photonis Defense Vyper-14
  • Photonis Defense Hyper-14
  • Adams Industries Sentinel
  • Low Light Innovations Aeternus
  • Low Light Innovations LLUL-21
  • Low Light Innovations MH-1
  • Jerry-FM/Luffy-FM/Rix RENV-M
  • Jerry-FB/Luffy-FB/Rix RENV-B
  • APNVG

Please contact us if you require more information or your device is not listed above.