Description:
The Ultra-Light Articulating Night Vision Binocular – Single Control (U.A.N.V.B.-S.C.), known as the “Raptor,” builds on the lessons of previous Nocturn Industries models and incorporates direct user feedback. Engineered with a cutting-edge carbon fiber reinforced thermoplastic composite, our injection molded material surpasses traditional polymer solutions and rivals 6061-T6 aluminum in tensile strength.
It features an ergonomic single control knob for both power and gain adjustment. Double-tapping the knob activates the IR illuminator, with an integrated indicator showing its status, and the brightness can be adjusted while the illuminator is active. Through the same knob users can disable or enable auto off when stowed. A low battery indicator alerts users when battery replacement is required.
The Raptor is compatible with standard EGAC MX-11769 and 3-pad MX-11769 image intensifier tubes, as well as PVS-14 optics and accessories. It includes an on-board battery compartment and has an external LEMO 2-pin power port. The Raptor’s image tube pod is interchangeable with U.N.V.M. “Talon”. Low-profile interpupillary distance (IPD) knobs allow easy, tool-free adjustment for rapid setup and user comfort.
The Raptor is fully designed and assembled in the United States, combining lightweight design, rugged durability, and operational versatility for professional night vision applications.
Technical specifications:
-
- Housing: High strength hybrid fiber reinforced injection molded polymer
- Colour: Mil-standard Type III class II hard anodize, H-Series Cerakote
- Weight: 586g with standard optics and a battery
- Power Supply: CR123 onboard
- Out-Board Power: Yes, LEMO port
- Runtime: 26+ hours
- Objective lens: Mil-Spec Lightweight Objective, EFL 27mm, F/1.2
- Focus Range: 25cm to infinity
- Field of View: 40º
- Diopter: Adjustable +2 to -6
- Environmental protection: Exceeds IP-68, and MIL-STD-810H
- Low Battery Indicator
- IR illuminator
- Manual gain
Image intensifier tubes:
Device is supplied with NNVT Gen 2+ green and white phosphor image intensifier tubes.
The NNVT Gen 2+ green and white phosphor image intensifier tubes provide incredible value for the cost and provide friendly price point without the significant performance sacrifices. NNVT intensifiers have good performance in mixed-lighting conditions.
NNVT FOM1600+ image intensifier tubes adopts new MCP processing technology and new photocathode process. It is equipped with autogating and has the characteristics of high all-weather reliability. Compared with NVT4, its sensitivity is increased to more than 800, and the SNR is greater than 25.
NNVT FOM1800+ and higher image intensifier tubes uses the latest S25R photocathode manufacturing technology. The photocathode sensitivity is higher than 1000μA/lm@2856K, and it has high sensitivity in the near-infrared band. The spectral range is from 380nm to 1100nm, with higher spectral sensitivity in the near-infrared band, capable of imaging 1064nm lasers with halo reduced to less than 0.7mm.
Image intensifier tube specification:
NNVT FOM 1600+ Gen 2+ Autogate
Luminance sensitivity 2850K: ≥850 μA/lm
Signal-to-Noice Ratio: Min 25
Resolution: Min 64
Gain: Min 8000 cd/m²/lx r
Fast Auto-Gating Power Supply Unit
NNVT FOM 1800+ Gen 2+ Autogate
Luminance sensitivity 2850K: ≥1000 μA/lm
Signal-to-Noice Ratio: Min 28
Resolution: Min 64 – Typical 68
Gain: Min 10000 cd/m²/lx r
Fast Auto-Gating Power Supply Unit
NNVT FOM 2000+ Gen 2+ Autogate
Luminance sensitivity 2850K: ≥1000 μA/lm
Signal-to-Noice Ratio: Min 28
Resolution: Min 68
Gain: Min 10000 cd/m²/lx r
Fast Auto-Gating Power Supply Unit
Small halo; Max 0,7mm
NNVT FOM 2300+ Gen 2+ Autogate
Luminance sensitivity 2850K: ≥1000 μA/lm
Signal-to-Noice Ratio: Min 30
Resolution: Min 68
Gain: Min 10000 cd/m²/lx r
Fast Auto-Gating Power Supply Unit
Small halo; Max 0,7mm
Warranty:
Paukatti Oy’s night vision devices (excluding manufacturer built systems which are subject to their manufacturer warranty) are guaranteed to be free from manufacturing defects in both material and workmanship under normal use for a period of three (3) years for night vision device housing and two (2) years for NNVT image intensifier tubes and and one (1) years for Photonis image intensifier tubes from the date of purchase.