Menu Close

Shop

Showing 1–20 of 236 results

  • Sale!IRTech RS650-640 Multifunction Clip-On

    IRTech RS650-640 Multifunction Clip-On

    Original price was: 2 600,00 €.Current price is: 2 200,00 €.

    The IRTech RS6 fuses the capabilities of a thermal clip-on and a thermal riflescope. The RS6 gives you versatility and performance as a dedicated thermal sight, or compatibility with day optics up to 12× as an clip-on sight. The combination of the RS6’s low-distortion orthoscopic eyepiece and 0.49 inch Color OLED 1440×1080 resolution display provides comfortable viewing as a dedicated sight while still maintaining the pixel density and resolution for use as a clip-on optic. 

    Included in delivery:

    • IRTech RS6 Thermal Clip-On
    • Carrying case
    • Objective Lens Covers
    • USB data and video cable
    • Picatinny mount
    • M52×0.75 adapter
    • 40mm/47mm clamp adapter
    • Magnification eyepiece
    • Rubber eyecover

    IRTech RS650-640 Multifunction Clip-On manual

  • AGM Rattler-C V2 50-640 Clip-On

    AGM Rattler-C V2 50-640 Clip-On

    3 200,00 €

    The AGM Rattler-C V2 series of thermal clip-ons boasts a industry-leading 12 micron, sub-20mk thermal detectors. These physical attributes provide users with some of the best image quality AGM has produced to date with potential detection ranges up to 2600 yards. The Rattler-C V2 thermal clip-ons have a high-sensitivity sensor with 640×512 resolutions, which provides a clear image under harsh environment conditions like darkness, fog, smoke, dust, rain, snow, wood, camouflage, etc.

  • AGM Secutor LRF-C 50-640 Clip-On

    AGM Secutor LRF-C 50-640 Clip-On

    4 700,00 €

    The Secutor LRF-C is a compact thermal imaging clip-on system with built-in precision laser rangefinder that allows quick transformation of the day optics into thermal imaging device without any special tools or equipment. Equipped with a highly sensitive, 12μm thermal detector and 1024×768 OLED monitor, the AGM Secutor LRF-C provides a clear image under harsh environmental conditions including darkness, fog, smoke, dust, rain, snow, brush, camouflage, etc.

  • IRTech RS750-640 Thermal Rifle Scope

    IRTech RS750-640 Thermal Rifle Scope

    2 600,00 €

    The IRTech RS7 providethe capabilities of a thermal rifle scope in traditional format. The RS7 gives you versatility and performance as a thermal sight what can be mounted to standard 30mm rings. The combination of the RS7’s  low-distortion orthoscopic eyepiece and 0.49 inch Color OLED 1440×1080 resolution display provides comfortable and crisp image.

    Included in delivery:
    • IRTech RS7 Thermal Rifle Scope
    • Carrying case
    • Objective Lens Covers
    • USB data and video cable
    • Rubber eyecover
  • AGM Secutor LRF-C 75-640 Clip-On

    AGM Secutor LRF-C 75-640 Clip-On

    6 400,00 €

    The Secutor LRF-C is a compact thermal imaging clip-on system with built-in precision laser rangefinder that allows quick transformation of the day optics into thermal imaging device without any special tools or equipment. Equipped with a highly sensitive, 12μm thermal detector and 1024×768 OLED monitor, the AGM Secutor LRF-C provides a clear image under harsh environmental conditions including darkness, fog, smoke, dust, rain, snow, brush, camouflage, etc.

  • AGM ObservIR LRF 35-640

    AGM ObservIR LRF 35-640

    3 700,00 €

    THERMAL AND DIGITAL BINOCULAR

    The AGM ObservIR LRF Thermal & Digital Day/Night Vision binocular is some of the most technologically advanced and feature-packed optics in the world. The primary engine behind these binocular lies within the main thermal viewing channel, with its high-sensitivity 640×512 12 micron NEDT <15 mK detector. 

    Package Includes

    • 4x 18650 Rechargeable Battery
    • Battery Charger
    • USB Cable
    • Power Adapter
    • Tripod Adapter
    • Quick Start Guide
    • User Manual
    • Lens Cloth
    • Neck Strap

     

  • AGM ObservIR LRF 50-640

    AGM ObservIR LRF 50-640

    4 300,00 €

    THERMAL AND DIGITAL BINOCULAR

    The AGM ObservIR LRF Thermal & Digital Day/Night Vision binocular is some of the most technologically advanced and feature-packed optics in the world. The primary engine behind these binocular lies within the main thermal viewing channel, with its high-sensitivity 640×512 12 micron NEDT <15 mK detector. 

    Package Includes

    • Two NE-7255 Li-ion Batteries 7.18 V/5400 mAh
    • NE-7255 Battery Charger
    • USB-C to UCB-C Cable (fast charging)
    • USB-A to USB -C Cable
    • Power Adapter
    • Tripod Adapter
    • Quick Start Guide
    • Neck Strap
    • Lens Cloth
    • Owners Manual

     

  • AGM ObservIR LRF 60-1280

    AGM ObservIR LRF 60-1280

    6 300,00 €

    THERMAL AND DIGITAL BINOCULAR

    The AGM ObservIR LRF Thermal & Digital Day/Night Vision binocular is some of the most technologically advanced and feature-packed optics in the world. The primary engine behind these binocular lies within the main thermal viewing channel, with its high-sensitivity 1028/1024 12 micron NEDT <18 mK detector. 

    Package Includes

    • Two NE-7255 Li-ion Batteries 7.18 V/5400 mAh
    • NE-7255 Battery Charger
    • USB-C to UCB-C Cable (fast charging)
    • USB-A to USB -C Cable
    • Power Adapter
    • Tripod Adapter
    • Quick Start Guide
    • Neck Strap
    • Lens Cloth
    • Owners Manual
  • AKILA ACS Chassis System
    Sold out!

    AKILA ACS Chassis System

    1 575,00 €

    AKILA Chassis System suitable for Tikka’s T3/T3x bolt-action rifles but also Remington 700, Howa 1500 and Steyr mannlicher SSG 69 rifles short action rifles. ACS converts your bolt action hunting rifle into a long range target shooting rifle with adjustable ergonomics, M-LOK interface handguard, folding stock with the ability to set the folding side and an integrated monopod. With no modifications done to your original rifle. So you can simply choose what you are up to today, hunting, long range shooting practice or PRS competitions. 

  • AKILA ACSBRX1 for Beretta BRX1
    Sold out!

    AKILA ACSBRX1 for Beretta BRX1

    1 575,00 €

    ACSBRX1 is suitable for Beretta’s BRX1 model. Left-handed and right-handed versions all makes and models. It is a drop in upgrade chassis, this means that you would require the following parts to complete the rifle: barrel, bolt with bolt head, receiver and magazine. For installation you do not need a gunsmith.

  • AKILA ACSR8U for Blaser R8
    Sold out!

    AKILA ACSR8U for Blaser R8

    1 575,00 €

    ACSR8U is suitable for Blaser’s R8 Ultimate and Standard models with wooden stocks. Left-handed and right-handed versions all makes and models. It is a drop in upgrade chassis, this means that you would require the following parts to complete the rifle: barrel, bolt with bolt head, receiver and magazine (both magazine versions fit the ACSR8U).

  • AKILA ACST30 for Tikka T3
    Sold out!

    AKILA ACST30 for Tikka T3

    1 850,00 €

    ACST30 is a carbon fibre stock suitable for all versions of Tikka’s T3 and T3x bolt-action rifles.

  • Aluminium Dovetail J-Arm

    Aluminium Dovetail J-Arm

    100,00 €

    The Aluminum PVS14 NVG J Arm with NVG Interface Shoe provides a durable connection for mounting an AN/PVS-14 monocular to a NVG mount. It can be easily mounted and dismounted from the AN/PVS-14 monocular by means of a thumb screw, and allows the operator to select the height and angle for comfort with the ability to make fine adjustments to the arm. 110 degrees of motion accommodates right or left eye dominance. This Mounting Arm is only compatible with the AN/PVS-14 series of night vision monoculars and utilizes a dovetail interface.

  • Bayonet J-arm

    Bayonet J-arm

    60,00 €

    The Bayonet J-Arm adapter interface allows mounting a night vision monocular such as the PVS-14 to a compatible headgear or helmet mount for hands-free operation. The monocular can be moved/swiveled between right and left eye.

  • Polymer Dovetail J-Arm

    Polymer Dovetail J-Arm

    40,00 €

    The Polymer PVS14 NVG J Arm with NVG Interface Shoe provides a durable connection for mounting an AN/PVS-14 monocular to a NVG mount. It can be easily mounted and dismounted from the AN/PVS-14 monocular, and allows the operator to select the height and angle for comfort with the ability to make fine adjustments to the arm. 110 degrees of motion accommodates right or left eye dominance. This Mounting Arm is only compatible with the AN/PVS-14 series of night vision monoculars and utilizes a dovetail interface.

  • Polymer PVS-14 bridge

    Polymer PVS-14 bridge

    40,00 €

    Cost effective polymer PVS-14 bridge. Users can selectively adjust the goggle’s field of view from 40 to approximately 70 degrees by laterally rotating (or “panning”) each individual monocular outward, creating a panoramic image. With an locking adjustable mechanism and resulting wide-view image, you can enjoy vastly improved situational awareness and the feeling like you’re not even looking through image intensifying tubes.

  • MLB – Modular Lightweight Bridge

    MLB – Modular Lightweight Bridge

    390,00 €

    Tailored for PVS-14 and Jerry-YM/PFN, MLB mount prioritizes device-specific precision, ensuring minimalism, lightweight design, and cost-effectiveness.

  • Aluminium NVG Helmet Mount

    Aluminium NVG Helmet Mount

    175,00 €

    The Aluminium Night Vision Goggle Mount is designed to the be lowest possible profile of any removable NVG mount on the market in both the active and stowed positions.

    Mount have user-adjustable dovetail shoe to fit off-spec devices including increased overall fore/aft rail travel places nigh vision googles substantially closer to the user’s eye and farther out to accommodate for gas masks and other eyewear compared to industry mounts such as the Wilcox G24 (~2 inches of travel). Ergonomic “one touch” spring-loaded height adjustment allows operator to adjust height with one hand. Also six position adjustable mounting plate fits numerous facial profiles and helmet mounting systems.

  • PVS-14 Weapon Mount

    PVS-14 Weapon Mount

    200,00 €

    This Mil-spec PVS-14 Weapon’s Mount allows you to attach your monocular to any MIL-STD-1913/Nato Accessory Rail Picatinny rail.

  • Atlasworxs Bottom Metal

    Atlasworxs Bottom Metal

    190,00 €

    Atlasworxs Bottom Metals (AICS)  are made to utilize the most reliable detachable box magazines commonly  used in today’s bolt action rifles, which is the Accuracy International AICS magazine.

    The  benefits of using the superior AICS magazines are for their reliability and availability in 5 or 10 round capacity.

    The AICS pattern is also becoming a standard for other magazine manufacturers such as Accurate Mag and MDT amongst others, therefore making the AICS pattern magazines more readily available and cost effective.