KRG
Showing 1–20 of 21 results
-
170,00 €Now you can add a top rail to the C-4 Barrel Shroud. Offered in three lengths, which correspond specifically to each of the three C-4 barrel shrouds. Perfect for adding clip-on night vision, top mounted bi-pod, or a prism unit for ELR shooting. Comes with required mounting screws.
-
300,00 €Add weight to the forend of your C-4 Chassis. The Forend Side Weights can be added to the right and/or left side of the C-4 forend for better balance and easier followup shots. Two weights can be added to either side of the C-4 forend for maximum recoil dampening.
Ships as a set of two.
-
200,00 €C-4 Forend Weight can be added to the C-4 forend for better balance and easier followup shots. Up to two Forend Weights may be mounted inside recessed channel.
-
190,00 €Add weight to the backend of your C-4 Chassis. The Rear Weight can be added to the right and/or left side of the C-4 backend for better balance and easier followup shots. Also the weight can be mounted under the right grip panel inside the pocket.
-
400,00 €Integrated Night Vision Rail (INVR): This Night Vision Rail mounts in the barrel channel of the Whiskey-3, X-ray, or TRG-22/42 chassis and provides mounting options…
-
200,00 €The KRG Arca rail gives you Arca-Swiss rail functionality for your KRG Whiskey-3, X-ray, or Bravo chassis. It’s low profile and light weight and mounts to the bottom of the forend without being obtrusive. There are limitless possibilities for mounting and positioning acessories to your chassis with the Arca rail. Attach your bipod or our Barrier Multi-tool to our Arca Clamp or another brand’s clamp and quickly position your item anywhere along the rail, for example. You can easily remove or re-position for the next stage or even during a stage.
Fits: KRG Whiskey-3, X-ray, and Bravo chassis.
Restrictions: Use as many fasteners as possible to mount the Arca rail to maintain rigidity. The Arca Rail does not work on 180-Series chassis.
-
600,00 €ARCA Rail Enclosed Forend: A competition focused version of our original Enclosed Forend for your KRG chassis. Includes an integral ARCA rail and M-Lok slots for your mounting needs. The top rail has been removed providing a comfortable grip for your offhand and just like the original it extends approximately 4″ further than the standard forend offering plenty of real estate for bipod and other attachments.
Since it’s best to keep your scope as close to the boreline as possible, the ARCA Enclosed Forend has an area cut out over the barrel, which allows for the scope objective to sit low in a natural position.
Fits: Whiskey-3, X-ray, and Bravo Chassis
-
300,00 €The KRG Arca Rail Heavy gives you Arca-Swiss rail functionality for your KRG Whiskey-3, X-ray, or Bravo chassis, plus it adds an extra 1lbs 3oz for a steady position to get you back on target fast at your next match. There are tons of possibilities for mounting and positioning accessories to your chassis with this rail. Attach your bipod or our Barrier Multi-tool to our Arca Clamp and quickly position your item anywhere along the rail. You can easily remove or re-position for the next stage or even during a stage.
Fits: KRG Whiskey-3, X-ray, and Bravo chassis.
Restrictions: Use as many fasteners as possible to mount the rail to maintain rigidity. Does not work on 180-Series chassis. Does not ship with fasteners for use with the Enclosed Forend.
-
300,00 €The Arca Spigot Mount is a modified version of the standard KRG Spigot Mount. It has an Arca rail cut into it so you can use all the various Arca clamps and items right on your KRG Spigot Mount. The Spigot Mount is one of our most popular accessories as it allows all kinds of mounting options for your Whiskey-3, X-ray, or Bravo chassis from NV mounts to sling mounts and more. Like the standard Spigot, it features a bolt-on installation into the slot at the front of the chassis.
Furthermore, the Arca Spigot can move a bipod closer to the bore by about an inch and further toward the muzzle approximately five inches from the regular chassis forend.
-
700,00 €The Bravo provides you with the essential chassis benefits combined with conventional target/varmint ergonomics all at a modest price. If you’re looking for your perfect balance in Chassis, Bravo is exactly what you need.
The Bravo is one of the most comfortable stocks available but that’s just the beginning. The price will make you and your wallet overjoyed.
The precisely machined bedding area will put your action in its happy place nearly like it was custom bedded in there. The full length stiff aluminum backbone will not allow the forend to flex on you but does allow design modularity with loads of accessories and even other KRG chassis. The ergonomic adjustments are just what you need to fit your frame so you can pull off the difficult shots. Of course it takes AICS mags right out of the box.
It’s light. It’s comfortable. It’s modular. It’s good looking. And it’s practically free. You will love it.
-
1 650,00 €Bravo Chassis upgraded with Enclosed Arca Forend, Tool-less LOP, and Aluminum Cheekpiece Thumbscrew
The Bravo provides you with the essential chassis benefits combined with conventional target/varmint ergonomics all at a modest price. If you’re looking for your perfect balance in Chassis, Bravo is exactly what you need.
The Bravo is one of the most comfortable stocks available but that’s just the beginning. The price will make you and your wallet overjoyed.
The precisely machined bedding area will put your action in its happy place nearly like it was custom bedded in there. The full length stiff aluminum backbone will not allow the forend to flex on you but does allow design modularity with loads of accessories and even other KRG chassis. The ergonomic adjustments are just what you need to fit your frame so you can pull off the difficult shots. Of course it takes AICS mags right out of the box.
It’s light. It’s comfortable. It’s modular. It’s good looking. And it’s practically free. You will love it.
-
500,00 €If you own a Bravo chassis and like the fit and feel but would like a little more convenient ergonomic adjustment, this kit is for you. It basically takes your Bravo from an entry level product to a fully featured, premium level chassis for your high end build. You will get the ability to adjust the length-of-pull (length from trigger to recoil pad) without tools, plus be able to adjust the recoil pad height and cant. This will all make it easier for you to obtain the proper shooting position and sight picture.
This kit is made of billet machined components. It’s not cheap but it’s high quality and the locking mechanism locks up tightly.
-
2 850,00 €Purpose built with direct feedback from top competitors and trainers the C-4 is the epitome of the modern competition rifle chassis. With sought after features such as tool-less adjustable length of pull, cheekpiece, height and cant, as well as our new bag rider height adjustment, this chassis is designed to fit the shooter for maximum comfort and repeatability. We’ve also included height and tension adjustment for your magazine to adjust for the many variations that can occur allowing your preferred AICS or AW mag to fit and feed just right.
The C-4 features a full monolithic aluminum frame, an extended 16 3/4″ forend, and an integral ARCA Rail making it extremely rigid and resistant to variations. If you are looking for the ultimate competition chassis the C-4 is ready to go for your next rifle build.
-
600,00 €ARCA Rail Enclosed Forend: A competition focused version of our original Enclosed Forend for your KRG chassis. Includes an integral ARCA rail and M-Lok slots for your mounting needs. The top rail has been removed providing a comfortable grip for your offhand and just like the original it extends approximately 4″ further than the standard forend offering plenty of real estate for bipod and other attachments.
Since it’s best to keep your scope as close to the boreline as possible, the ARCA Enclosed Forend has an area cut out over the barrel, which allows for the scope objective to sit low in a natural position.
Fits: Whiskey-3, X-ray, and Bravo Chassis
-
1 500,00 €KRG folding buttstock for your TRG-22/42 are a robust and ergonomic upgrade for your fine Sako rifle. It replaces the back half of your current TRG-22/42 stock, you keep your forend, chassis, and trigger components. It is fully tool-less adjustable for length-of-pull, cheek height, recoil pad vertical position and cant to provide you the comfort that is close but just isn’t quite there with standard TRG. The latch mechanism features a proven spring loaded tapered detent design to provide a tight lockup throughout the life of the stock and ambi QD sling points are included.
-
1 650,00 €The Whiskey-3 Gen 7 is the latest refinement in KRG premier line of rifle chassis – combining precise aluminum bedding with tool-less adjustments, lightweight, and excellent ergonomics. Right out of the box it allows the use of AICS style magazines (not included) without any special bottom metal. The newly designed cheekpiece allows for both fore & aft as well as side to side adjustment. The folding version gets a brand new hinge system, which can be configured for left or right sided folding.
The Whiskey-3 is highly modular and can be configured to cover the needs of the modern precision shooter. Accessories including ARCA Rails, NV Caps, weight kits, and many more are available and easily attached so you can be ready for that next team match or hog hunting at night with your buddies. Whatever your mission is the Whiskey-3 Gen 7 is up for the challenge.
-
2 150,00 €Introducing the Whiskey-3 Pro the flagship KRG chassis system. Combining elements of the Whiskey-3 and C-4 into one platform with the features many have been asking for. The new monolithic aluminum front end combines our traditional backbone with an extended forend featuring an integrated ARCA rail on the bottom and M-Lok mounting points at the 3, 6, & 9 o’clock positions. The back end features an all new cheekpiece with fore & aft as well as side to side adjustment. The folding version can be user configured to fold to the left or the right.
The Whiskey-3 Gen 7 Pro is the latest refinement in our premier line of rifle chassis combining precise aluminum bedding with tool-less adjustments and excellent ergonomics all in a lightweight package.
-
890,00 €X-Ray Chassis (Generation 5) Unprecedented value…This is what the X-Ray chassis provides to you.
When you pick up the X-Ray, it will feel nice and light compared to other chassis. You’ll have nearly identical ergonomics to the Whiskey-3 with only a little more time involved in adjusting the different aspects like the length of pull.
Furthermore, you’ll have all the standard benefits of an adjustable rifle stock; i.e. chassis, like the use of AICS magazines, a variety of mounting points for slings, barrier stops, etc., and aluminum block bedding for the action while not having to sell off a kidney to pay the price of admission.
To accomplish our design intent, we kept the features that everyone wants and needs and eliminated those that weren’t necessary or featured on other replacement rifle stocks.. Then we utilized efficient manufacturing processes to keep production costs down and in turn keep the price to the shooter down. The end result is a hybrid aluminum and polymer chassis that we think you’ll love.
We’re proud to present the X-Ray chassis, the result of years of careful design, thought, refinement, and hard work.
-
330,00 €If you want an NV mount on your KRG chassis and you don’t have a KRG Spigot Mount, this may be for you. It mounts…
-
370,00 €NV Mount Cap Kit replaces the IMUNS kit. It installs onto the spigot mount, giving a top rail mount option for mounting night vision devices…