Kiväärin tukit
Showing 1–20 of 55 results
-
1 575,00 €AKILA Chassis System suitable for Tikka’s T3/T3x bolt-action rifles but also Remington 700, Howa 1500 and Steyr mannlicher SSG 69 rifles short action rifles. ACS converts your bolt action hunting rifle into a long range target shooting rifle with adjustable ergonomics, M-LOK interface handguard, folding stock with the ability to set the folding side and an integrated monopod. With no modifications done to your original rifle. So you can simply choose what you are up to today, hunting, long range shooting practice or PRS competitions.
-
1 575,00 €ACSBRX1 is suitable for Beretta’s BRX1 model. Left-handed and right-handed versions all makes and models. It is a drop in upgrade chassis, this means that you would require the following parts to complete the rifle: barrel, bolt with bolt head, receiver and magazine. For installation you do not need a gunsmith.
-
1 575,00 €ACSR8U is suitable for Blaser’s R8 Ultimate and Standard models with wooden stocks. Left-handed and right-handed versions all makes and models. It is a drop in upgrade chassis, this means that you would require the following parts to complete the rifle: barrel, bolt with bolt head, receiver and magazine (both magazine versions fit the ACSR8U).
-
1 850,00 €ACST30 is a carbon fibre stock suitable for all versions of Tikka’s T3 and T3x bolt-action rifles.
-
460,00 €The Gladiatore suite of shotgun furniture upgrades are sophisticated while also significant performance upgrades. Built from premium American walnut, combining Italian design and functinality that goes beyond the original equipment. Dual M-LOK® rails on the fore end, a stock with raised cheek comb, a club grip with bulbous flare for a sure hold, and aggressive checkering on every component make Gladiatore the upgrade of choice.
-
450,00 €WOOX proudly presents the Vigilante series, a sophisticated aftermarket stock, grip, and handguard replacement kit designed for AR15 enthusiasts who appreciate both performance and aesthetic excellence.
The Vigilante stands as a celebration of heritage, blending authentic American Walnut with premium craftsmanship to deliver an unparalleled upgrade for your AR15 platform. Each piece in the Vigilante series is a testament to superior craftsmanship and meticulous attention to detail.
Stock and Grip: Compatible with AR10, AR15, M4, and M16 Mil-Spec models.
Handguard: Compatible only with AR15. -
1 875,00 €Delivery time: 3-8 weeks
The GS-BPC I chassis for the Blaser R8 offers ultimate ergonomics and precision!
The chassis consists of individually combinable modules and ensures optimum ergonomics and shooting stability. In addition to the different front and rear shafts, the color can be individually selected.
-
1 875,00 €
Delivery time: 3-8 weeks
The GS-BPC I chassis for the Blaser R93 offers ultimate ergonomics and precision!
The chassis consists of individually combinable modules and ensures optimum ergonomics and shooting stability. In addition to the different front and rear shafts, the color can be individually selected.
-
230,00 €ADJUSTABLE BAG RIDER allows you to set your angle and position to increase your stability while shooting prone or from a bench.
-
130,00 €Machined Butt Pad Spacer (1/4″ thick) to increase & personalize your LOP. Depending on how many Butt Spacers you use together, you may need longer bolts.
-
250,00 €Uniquely designed M-LOK ARCA RAIL runs the full length of the forend, plus extends 2″ past the front of the chassis (ARCA-2) or 6″ past the front of the chassis (ARCA-6).
-
120,00 €M-LOK Picatinny Rails (in sizes 2″, 4″, or 8″) attach to the M-LOK FLUSH RAIL, M-LOK ARCA RAILS, and to the M-LOK SIDE RAIL ADAPTERS and allow you to attach Bipods or other 1913 PICATINNY RAIL Spec Accessories.
-
350,00 €Night Vision Mount w/ 20 MOA Integral Rail for mounting Night Optics. Fits: All JAE-700 G4 Chassis (Original to G4) (Does NOT fit the JAE-100…
-
150,00 €Hand Rest w/ Integral Picatinny Rail allows for attaching Monopod on rear and also adds support for non-trigger hand.
-
2 550,00 €NEW JAE-700 G5 CHASSIS (REM700 Short Action) has the strength & stabililty of a Chassis and the ergonomics & beauty of a traditional stock. Adjustable Magwell enables you to improve the feed on your mags so you can have confidence at a match or range.
-
700,00 €The Bravo provides you with the essential chassis benefits combined with conventional target/varmint ergonomics all at a modest price. If you’re looking for your perfect balance in Chassis, Bravo is exactly what you need.
The Bravo is one of the most comfortable stocks available but that’s just the beginning. The price will make you and your wallet overjoyed.
The precisely machined bedding area will put your action in its happy place nearly like it was custom bedded in there. The full length stiff aluminum backbone will not allow the forend to flex on you but does allow design modularity with loads of accessories and even other KRG chassis. The ergonomic adjustments are just what you need to fit your frame so you can pull off the difficult shots. Of course it takes AICS mags right out of the box.
It’s light. It’s comfortable. It’s modular. It’s good looking. And it’s practically free. You will love it.
-
1 650,00 €Bravo Chassis upgraded with Enclosed Arca Forend, Tool-less LOP, and Aluminum Cheekpiece Thumbscrew
The Bravo provides you with the essential chassis benefits combined with conventional target/varmint ergonomics all at a modest price. If you’re looking for your perfect balance in Chassis, Bravo is exactly what you need.
The Bravo is one of the most comfortable stocks available but that’s just the beginning. The price will make you and your wallet overjoyed.
The precisely machined bedding area will put your action in its happy place nearly like it was custom bedded in there. The full length stiff aluminum backbone will not allow the forend to flex on you but does allow design modularity with loads of accessories and even other KRG chassis. The ergonomic adjustments are just what you need to fit your frame so you can pull off the difficult shots. Of course it takes AICS mags right out of the box.
It’s light. It’s comfortable. It’s modular. It’s good looking. And it’s practically free. You will love it.
-
2 850,00 €Purpose built with direct feedback from top competitors and trainers the C-4 is the epitome of the modern competition rifle chassis. With sought after features such as tool-less adjustable length of pull, cheekpiece, height and cant, as well as our new bag rider height adjustment, this chassis is designed to fit the shooter for maximum comfort and repeatability. We’ve also included height and tension adjustment for your magazine to adjust for the many variations that can occur allowing your preferred AICS or AW mag to fit and feed just right.
The C-4 features a full monolithic aluminum frame, an extended 16 3/4″ forend, and an integral ARCA Rail making it extremely rigid and resistant to variations. If you are looking for the ultimate competition chassis the C-4 is ready to go for your next rifle build.
-
1 650,00 €The Whiskey-3 Gen 7 is the latest refinement in KRG premier line of rifle chassis – combining precise aluminum bedding with tool-less adjustments, lightweight, and excellent ergonomics. Right out of the box it allows the use of AICS style magazines (not included) without any special bottom metal. The newly designed cheekpiece allows for both fore & aft as well as side to side adjustment. The folding version gets a brand new hinge system, which can be configured for left or right sided folding.
The Whiskey-3 is highly modular and can be configured to cover the needs of the modern precision shooter. Accessories including ARCA Rails, NV Caps, weight kits, and many more are available and easily attached so you can be ready for that next team match or hog hunting at night with your buddies. Whatever your mission is the Whiskey-3 Gen 7 is up for the challenge.
-
890,00 €X-Ray Chassis (Generation 5) Unprecedented value…This is what the X-Ray chassis provides to you.
When you pick up the X-Ray, it will feel nice and light compared to other chassis. You’ll have nearly identical ergonomics to the Whiskey-3 with only a little more time involved in adjusting the different aspects like the length of pull.
Furthermore, you’ll have all the standard benefits of an adjustable rifle stock; i.e. chassis, like the use of AICS magazines, a variety of mounting points for slings, barrier stops, etc., and aluminum block bedding for the action while not having to sell off a kidney to pay the price of admission.
To accomplish our design intent, we kept the features that everyone wants and needs and eliminated those that weren’t necessary or featured on other replacement rifle stocks.. Then we utilized efficient manufacturing processes to keep production costs down and in turn keep the price to the shooter down. The end result is a hybrid aluminum and polymer chassis that we think you’ll love.
We’re proud to present the X-Ray chassis, the result of years of careful design, thought, refinement, and hard work.