monocular
Showing 41–60 of 80 results
-
9 500,00 €The TigIR-Z is currently the lightest and smallest thermal imaging device with 55mm optics. No other device reaches a range (standing man) of 3000m with such a short overall length of only 111mm. These small dimensions could only be achieved by developing a specially folded eyepiece optics. This allows to use the device in front of different spotting scopes (3-7x) etc. without loss of quality. Since the entire housing is made of highly stable aluminium and the objective optics are athermal, the TigIR has outstanding precision even under extreme temperature conditions. The housing surface is hard anodized and coated with a scratch-resistant ceramic lacquer. Thus, the TigIR defies even hard knocks in rough environments, yet weighs only around 527g, making it lighter than any other comparable device.
-
Expandable with attachment lens to 4km range.
Andres Industries latest thermal imaging attachment is the PumIR. With a total weight of less than 300g and a length of just over 10cm, it is certainly much smaller than the TigIR, but in combination with the appropriate attachment lens, the device even has a 30% higher range of 4km.
Especially this long range combination with a weight clearly below 500g is unique in its compactness worldwide. Due to its low profile design, it is well usable with tactical scopes that have a reflex sight, such as the 4×32 ACOG with RMA from Trijicon. Of course, the PumIR series also has all the popular features of thermal imagers developed by Andres Industries.
ONLY FOR OFFICIAL CUSTOMERS!
VAIN VIRANOMAISASIAKKAILLE!TIEDUSTELUT INFO@PAUTAC.FI
-
Expandable with attachment lens to 4km range.
Andres Industries latest thermal imaging attachment is the PumIR. With a total weight of less than 300g and a length of just over 10cm, it is certainly much smaller than the TigIR, but in combination with the appropriate attachment lens, the device even has a 30% higher range of 4km.
Especially this long range combination with a weight clearly below 500g is unique in its compactness worldwide. Due to its low profile design, it is well usable with tactical scopes that have a reflex sight, such as the 4×32 ACOG with RMA from Trijicon. Of course, the PumIR series also has all the popular features of thermal imagers developed by Andres Industries.
-
3 600,00 €The PVS-14 US Milspec Monocular Night Vision Device features a complete night vision monocular in US Mil-Spec housing assembly with US Mil-Spec lens providing an high level of performance to price ratio.
Each monocular is cleaned, assembled, purged, and tested in Finland with precision tools using digital purging system.
Included in delivery:
- AN/PVS-14A Standard night vision monocular
- Soft Carrying case
- Objective Lens Covers
- Rubber Eyecup
- Sacrificial windows
- Demist shields
- Lens tissue
- J-arm (horn model)
- Headmount
- Tube spec sheet
- Assembly report
-
3 700,00 €
The PVS-14 US Milspec Monocular Night Vision Device features a complete night vision monocular in US Mil-Spec housing assembly with US Mil-Spec lens providing an high level of performance to price ratio.
Each monocular is cleaned, assembled, purged, and tested in Finland with precision tools using digital purging system.
Included in delivery:
- AN/PVS-14A Standard night vision monocular
- Soft Carrying case
- Objective Lens Covers
- Rubber Eyecup
- Sacrificial windows
- Demist shields
- Lens tissue
- J-arm (horn model)
- Headmount
- Tube spec sheet
- Assembly report
-
The TILO-6™ is Andres Industries new flagship in the field of thermal imaging. With its 640×512 pixel sensor resolution it achieves twice the range of the TILO-3Z+™ and a thermal resolution of <40mK, the Z+ leaves nothing to be desired.
ONLY FOR OFFICIAL CUSTOMERS!
VAIN VIRANOMAISASIAKKAILLE!TIEDUSTELUT INFO@PAUTAC.FI
-
The TILO-6MA™ is a particularly robust military and police version of the TILO series. In accordance with the special requirements of naval units, the housing has been milled completely from aluminum (AE), thus offering the following additional features:
- Waterproof up to 20m
- Bayonet adapter is part of the aluminium housing, therefore better precision and repeatability when used as clip-on thermal
- Higher impact strength
- Made of salt water resistant aluminum
ONLY FOR OFFICIAL CUSTOMERS!
VAIN VIRANOMAISASIAKKAILLE!TIEDUSTELUT INFO@PAUTAC.FI
-
4 900,00 €
The PVS-14 US Milspec Monocular Night Vision Device features a complete night vision monocular in US Mil-Spec housing assembly with US Mil-Spec lens providing an high level of performance to price ratio.
Each monocular is cleaned, assembled, purged, and tested in Finland with precision tools using digital purging system.
Included in delivery:
- AN/PVS-14A Standard night vision monocular
- Soft Carrying case
- Objective Lens Covers
- Rubber Eyecup
- Sacrificial windows
- Demist shields
- Lens tissue
- J-arm (horn model)
- Headmount
- Tube spec sheet
- Assembly report
-
120,00 €Suosittelemme, että valonvahvistimien tiiveys tarkastetaan kerran vuodessa ja laite huuhdellaan sekä täytetään typellä. Typpitäyttö poistaa laitteen sisältä kosteuden ja epäpuhtaudet, jotka voivat aiheuttaa valonvahvistinyksikön vaurioitumisen ajan saatossa.
-
Sold out!InfiRay CH50W Clip-On
3 500,00 €Clip CH50W is a top-end front attachment designed as the infrared expansion device of the day scope. In addition to retaining the advantages of clear image quality and no need to re-zero, CH50W also adds Wifi, photo and video functions. CH50W is featuring with precise aiming, ultra-clear imaging and complete functions.
Start your adventure with CH50W, turning your day riflescopes into powerful thermal imaging aiming systems.
To mount the clip-on to your day sight, you will require the adapter:
-
Sold out!Elf-C – COTI
3 200,00 €Elf-C is a clip on thermal imaging enhancement attachment designed for night Vision and minimum illumination in extreme environmental conditions. It facilitates the rapid enhancement of the existing device, enabling clip-on fusion and multi-mode display. This greatly enhances users’ nighttime battlefield perception, ensuring the prioritized recognition of potential adversaries and delivering a decisive tactical advantage.
It can be attached to PVS-14 optics on night vision devices such as the PVS-14 or Katana-R to superimpose a thermal image on an analog night vision, thus achieving a combination of the benefits of thermal and image intensification systems.
-
3 900,00 €The ELF-C Pro is an enhancement attachment with a rapid upgrade to the low light night vision device and infrared thermal imaging ability; It is currently the world’s lightest clip-on thermal imager with only 80g with battery. The product is mounted externally using a bracket, allowing for quick disassembly and calibration-free use, enhancing the recognition capabilities of night vision devices.
It can be attached to PVS-14 optics on night vision devices such as the PVS-14 or Katana-R to superimpose a thermal image on an analog night vision, thus achieving a combination of the benefits of thermal and image intensification systems.
Included Accessories
- Hardcase
- Thermal Imager
- NVD Mounting Bracket
- Remote Control
- Lens Cover
- Screwdriver
- Battery Pack + Cable
- Product Manual
- Pouch
-
3 700,00 €The FTM-CTM6 is used in conjunction with a day sight and has a built-in high-precision rangefinder module. It supports various functions such as image transmission through Wi-Fi, video recording, and Bluetooth remote control. In addition, it is equipped with a digital magnetic compass to provide more accurate positioning. It is compatible with numerous types of guns such as rifles.
Included accessories
- Thermal clip-on
- Soft carry-on bag
- Eye-cup
- Wireless remote control
- Clip-adapter to scope and spacers
- USB-C cable
- Battery charger
- Weapon mount (Picatinny)
- Spacers x 3
- Microfiber cloth
- Tool kit
- Screws
- User manual
-
The FTM-AISF is a world-leading, highly intelligent system. Using advanced AI technology and a high-performance intelligent computing platform, the U-IS enables the following features: detecting, locking, and tracking targets on different battlefields; automatic ballistic calculation based on the azimuth and movement characteristics of locked targets, and environmental parameters; predicting in real-time aiming area of the locked target .
Whether well-trained or not, the FTM-AISF ensures shooters to achieve first-round hits no matter the target is static or moving, which raising the striking efficiency of the weapon system to an unprecedented level.
The System also features one shot zeroing and quick battery removal.
Ask more info@pautac.fi
-
The FTM-BRF is a high‑precision handheld observation system combining a straight‑tube hinged binocular with a 1535 nm laser rangefinder.
It integrates ballistic computation, satellite positioning and navigation, an electronic compass, environmental sensors, and an OLED display, enabling a complete workflow from target acquisition and accurate ranging to ballistic solution, target localization, and FOS tasks. The device offers long‑distance measurement with high accuracy and supports connectivity with mobile applications and external anemometers. It is suitable for police operations, outdoor hunting, security inspection, geological exploration, engineering surveying, and search‑and‑rescue missions.
Ask more info@pautac.fi
-
The FTM-RFX series handheld laser rangefinder is developed based on the 1535nm erbium glass laser, which belongs to Class 1 eye-safe products.
The main functions are: single-point ranging, two-point ranging, angle measurement, height measurement, distance gating, target positioning, ballistic calculation, real-time display of measurement information in the eyepiece, power indication, data transmission and other functions. It is mainly used for onehanded holding, and can be used with a tripod for long-distance targets.
Small and lightweight device fits easily in your pocket.
Ask more info@pautac.fi
-
FTM-STH12 is equipped with a highest resolution thermal imaging module and has a built-in high-precision rangefinder module. It supports various functions impact video recording, capturing every exciting moment , and ballistic calculation. It is compatible with numerous types of guns such as rifles, sniper rifles, and shotguns.
Ask more info@pautac.fi
-
3 400,00 €Griffin‑IRS is a hybrid red‑dot and thermal imaging sight engineered to deliver reliable target acquisition in all weather and lighting conditions. It combines a rapid‑aim red‑dot system with a fully integrated thermal imaging module, allowing the shooter to maintain fast, intuitive aiming while simultaneously viewing clear thermal outlines and environmental detail. Whether in low light, total darkness, smoke, dust, or other visually degraded environments, Griffin‑IRS provides consistent situational awareness and precise engagement capability.
-
Ask for detailsThe Night Vision Upgrade Service is a fantastic way to take your existing NVGs and upgrade the image intensifier tubes or housing to the latest and most state-of-the-art technology.
With our Night Vision Upgrade Service, you can replace the IIT or housing in your current NVGs with any of ITTs or housing that we offer to your customers. Responding to budget-minded operator requests, you can save on the cost of a new night vision device by upgrading your existing NVGs.
Contact for details info@pautac.fi
-
18 500,00 €The Argus Panoramic Nightvision Goggle (APNVG) is a panoramic goggle system that increases a user’s field of view from a typical 40 degree monocular or binocular system up to 100 degrees. The APNVG uses four image intensifier tubes in order to provide the increased field of view without decreasing system resolution or compromising collimation.
Each device is cleaned, assembled, purged, and tested in Finland with precision tools using digital purging system.
Included in delivery:
- The Argus Panoramic Nightvision Goggle (APNVG)
- Hard Carrying case
- Argus Universal Strobe Battery Pack
- Objective Lens Covers
- Lens tissue
- Tube spec sheet
- Assembly report
- Operator’s manual
The APNVG units are build from order, please ask more detail delivery time.