sight
Showing 61–80 of 108 results
-
400,00 €The US Milspec PVS-14 lenses are industry-leading lens that surpass all others in the areas of rectilinear performance, off-axis flare suppression, light transmission, and contrast. These highly sought-after lenses are easily identified by the deep blue/teal anti-reflective coatings on both front and back lens surfaces.
Some lenses will have some traces of white lithium grease from the factory to aid in installation.
-
400,00 €The US Milspec PVS-14 lenses are industry-leading lenses that surpass all others in the areas of rectilinear performance, off-axis flare suppression, light transmission, and contrast. These highly sought-after lenses are easily identified by the deep blue/teal anti-reflective coatings on both front and back lens surfaces.
Some lenses will have some traces of white lithium grease from the factory to aid in installation.
-
40,00 €Low profile PVS-14 sacrificial lenses/windows provide a layer of protection against scratches, dust, dirt, and other debris. Low profile sacrificial lenses will fit any device equipped with standard PVS-14 pattern glass. We opted for a high transmission impact and scratch-resistant polycarbonate to keep weight to a minimum, while protruding as little as possible.
Pinhole covers (Day Filter) can fit over low profile sacrificial lens. Installation is quick and easy; simply thread Low Profile Sacrificial Lenses into the lenses of your device and you’re good to go.
Compatible with Standard PVS-14 pattern lenses (Noctis Technologies, Elbit, and other Mil-Spec lenses).
-
90,00 €The Adjustable IRIS Aperture is designed to offer end users reliable protection and enable full use of their Night Vision Devices. Built out of durable 6061 T6 Aluminum, the Adjustable IRIS Aperture is ready to take abuse. Securing to the NVG objective lens via threads, the Adjustable IRIS Aperture will not run the risk of popping off. The Adjustable IRIS Aperture features a polycarbonate sacrificial lens to keep your NVG objective lens from being scratched or damaged as well.
Additionally, the Adjustable IRIS Aperture offers huge levels of focal adjustment. With the turn of the Adjustable IRIS Aperture bezel, you can adjust the from 22.0mm down to 1.5mm. Adjustable IRIS Aperture system gives you the perfect balance of adjustability and utility. -
4 200,00 €The PVS-14 US Milspec Monocular Night Vision Device features a complete night vision monocular in US Mil-Spec housing assembly with US Mil-Spec lens providing an high level of performance to price ratio.
Each monocular is cleaned, assembled, purged, and tested in Finland with precision tools using digital purging system.
Included in delivery:
- AN/PVS-14A Standard night vision monocular
- Soft Carrying case
- Objective Lens Covers
- Rubber Eyecup
- Sacrificial windows
- Demist shields
- Lens tissue
- J-arm (horn model)
- Headmount
- Weapon mount
- Tube spec sheet
- Assembly report
- Operator’s manual
These are ready to ship devices. Other available options for intensifier tubes are available in specific product pages.
-
4 400,00 €The PVS-14R is a refined evolution of the proven PVS-14 night vision monocular, featuring a machined aluminum housing that is lighter than a traditional PVS-14 while offering increased durability and structural rigidity. Retaining the core features that made the PVS-14 a trusted standard, the PVS-14R provides the same style optics, manual gain control, high light shut off, and full compatibility with existing PVS-14 accessories. In addition to onboard power, it adds a remote battery pack port that allows for connection to an external battery pack, extending runtime for prolonged use in the field.
The PVS-14R delivers reliable performance in a modernized, mission ready platform designed for demanding applications.
Each monocular is cleaned, assembled, purged, and tested in Finland with precision tools using digital purging system.
Included in delivery:
- PVS-14R Ruggered Night Vision Monocular
- Soft Carrying case
- Objective Lens Covers
- Rubber Eyecup
- Tube spec sheet
- Assembly report
- Operator’s manual
-
The TigIR-6M™ manufactured in Germany is currently the shortest Clip-on Thermal with 55mm optics. The device is ideally suited for use in combination with 3-7x magnifying scopes. The extremely short design of only 111mm makes a mounting on machine guns possible, where due to the design there is only little space available for an attachment. In combination with certain scopes, such as the ELCAN Specter, the device protrudes only 10cm beyond the optics.
The robust aluminium housing offers good protection against drops and ensures consistently high precision even at different environmental temperatures.
ONLY FOR OFFICIAL CUSTOMERS!
VAIN VIRANOMAISASIAKKAILLE!TIEDUSTELUT INFO@PAUTAC.FI
-
9 500,00 €
The TigIR-Z is currently the lightest and smallest thermal imaging device with 55mm optics. No other device reaches a range (standing man) of 3000m with such a short overall length of only 111mm. These small dimensions could only be achieved by developing a specially folded eyepiece optics. This allows to use the device in front of different spotting scopes (3-7x) etc. without loss of quality. Since the entire housing is made of highly stable aluminium and the objective optics are athermal, the TigIR has outstanding precision even under extreme temperature conditions. The housing surface is hard anodized and coated with a scratch-resistant ceramic lacquer. Thus, the TigIR defies even hard knocks in rough environments, yet weighs only around 527g, making it lighter than any other comparable device.
-
Expandable with attachment lens to 4km range.
Andres Industries latest thermal imaging attachment is the PumIR. With a total weight of less than 300g and a length of just over 10cm, it is certainly much smaller than the TigIR, but in combination with the appropriate attachment lens, the device even has a 30% higher range of 4km.
Especially this long range combination with a weight clearly below 500g is unique in its compactness worldwide. Due to its low profile design, it is well usable with tactical scopes that have a reflex sight, such as the 4×32 ACOG with RMA from Trijicon. Of course, the PumIR series also has all the popular features of thermal imagers developed by Andres Industries.
ONLY FOR OFFICIAL CUSTOMERS!
VAIN VIRANOMAISASIAKKAILLE!TIEDUSTELUT INFO@PAUTAC.FI
-
Expandable with attachment lens to 4km range.
Andres Industries latest thermal imaging attachment is the PumIR. With a total weight of less than 300g and a length of just over 10cm, it is certainly much smaller than the TigIR, but in combination with the appropriate attachment lens, the device even has a 30% higher range of 4km.
Especially this long range combination with a weight clearly below 500g is unique in its compactness worldwide. Due to its low profile design, it is well usable with tactical scopes that have a reflex sight, such as the 4×32 ACOG with RMA from Trijicon. Of course, the PumIR series also has all the popular features of thermal imagers developed by Andres Industries.
-
3 600,00 €
The PVS-14 US Milspec Monocular Night Vision Device features a complete night vision monocular in US Mil-Spec housing assembly with US Mil-Spec lens providing an high level of performance to price ratio.
Each monocular is cleaned, assembled, purged, and tested in Finland with precision tools using digital purging system.
Included in delivery:
- AN/PVS-14A Standard night vision monocular
- Soft Carrying case
- Objective Lens Covers
- Rubber Eyecup
- Sacrificial windows
- Demist shields
- Lens tissue
- J-arm (horn model)
- Headmount
- Weapon mount
- Tube spec sheet
- Assembly report
- Operator’s manual
-
3 700,00 €
The PVS-14 US Milspec Monocular Night Vision Device features a complete night vision monocular in US Mil-Spec housing assembly with US Mil-Spec lens providing an high level of performance to price ratio.
Each monocular is cleaned, assembled, purged, and tested in Finland with precision tools using digital purging system.
Included in delivery:
- AN/PVS-14A Standard night vision monocular
- Soft Carrying case
- Objective Lens Covers
- Rubber Eyecup
- Sacrificial windows
- Demist shields
- Lens tissue
- J-arm (horn model)
- Headmount
- Weapon mount
- Tube spec sheet
- Assembly report
- Operator’s manual
-
The TILO-6™ is Andres Industries new flagship in the field of thermal imaging. With its 640×512 pixel sensor resolution it achieves twice the range of the TILO-3Z+™ and a thermal resolution of <40mK, the Z+ leaves nothing to be desired.
ONLY FOR OFFICIAL CUSTOMERS!
VAIN VIRANOMAISASIAKKAILLE!TIEDUSTELUT INFO@PAUTAC.FI
-
The TILO-6MA™ is a particularly robust military and police version of the TILO series. In accordance with the special requirements of naval units, the housing has been milled completely from aluminum (AE), thus offering the following additional features:
- Waterproof up to 20m
- Bayonet adapter is part of the aluminium housing, therefore better precision and repeatability when used as clip-on thermal
- Higher impact strength
- Made of salt water resistant aluminum
ONLY FOR OFFICIAL CUSTOMERS!
VAIN VIRANOMAISASIAKKAILLE!TIEDUSTELUT INFO@PAUTAC.FI
-
4 900,00 €
The PVS-14 US Milspec Monocular Night Vision Device features a complete night vision monocular in US Mil-Spec housing assembly with US Mil-Spec lens providing an high level of performance to price ratio.
Each monocular is cleaned, assembled, purged, and tested in Finland with precision tools using digital purging system.
Included in delivery:
- AN/PVS-14A Standard night vision monocular
- Soft Carrying case
- Objective Lens Covers
- Rubber Eyecup
- Sacrificial windows
- Demist shields
- Lens tissue
- J-arm (horn model)
- Headmount
- Weapon mount
- Tube spec sheet
- Assembly report
- Operator’s manual
-
Military standard multi-functional ALL-IN-ONE Thermal Binoculars packs thermal imager, digital night vision, laser range finder, GPS and many useful functions all in one device.
Ask more: info@pautac.fi
-
120,00 €Suosittelemme, että valonvahvistimien tiiveys tarkastetaan kerran vuodessa ja laite huuhdellaan sekä täytetään typellä. Typpitäyttö poistaa laitteen sisältä kosteuden ja epäpuhtaudet, jotka voivat aiheuttaa valonvahvistinyksikön vaurioitumisen ajan saatossa.
-
OUT OF STOCKInfiRay CH50W Clip-On
3 500,00 €Clip CH50W is a top-end front attachment designed as the infrared expansion device of the day scope. In addition to retaining the advantages of clear image quality and no need to re-zero, CH50W also adds Wifi, photo and video functions. CH50W is featuring with precise aiming, ultra-clear imaging and complete functions.
Start your adventure with CH50W, turning your day riflescopes into powerful thermal imaging aiming systems.
To mount the clip-on to your day sight, you will require the adapter:
-
OUT OF STOCKElf-C – COTI
3 200,00 €Elf-C is a clip on thermal imaging enhancement attachment designed for night Vision and minimum illumination in extreme environmental conditions. It facilitates the rapid enhancement of the existing device, enabling clip-on fusion and multi-mode display. This greatly enhances users’ nighttime battlefield perception, ensuring the prioritized recognition of potential adversaries and delivering a decisive tactical advantage.
It can be attached to PVS-14 optics on night vision devices such as the PVS-14 or Katana-R to superimpose a thermal image on an analog night vision, thus achieving a combination of the benefits of thermal and image intensification systems.
-
3 900,00 €The ELF-C Pro is an enhancement attachment with a rapid upgrade to the low light night vision device and infrared thermal imaging ability; It is currently the world’s lightest clip-on thermal imager with only 80g with battery. The product is mounted externally using a bracket, allowing for quick disassembly and calibration-free use, enhancing the recognition capabilities of night vision devices.
It can be attached to PVS-14 optics on night vision devices such as the PVS-14 or Katana-R to superimpose a thermal image on an analog night vision, thus achieving a combination of the benefits of thermal and image intensification systems.
Included Accessories
- Hardcase
- Thermal Imager
- NVD Mounting Bracket
- Remote Control
- Lens Cover
- Screwdriver
- Battery Pack + Cable
- Product Manual
- Pouch