Valikko Sulje

Andres Industries

Showing all 16 results

  • The TigIR-6M™ manufactured in Germany is currently the shortest Clip-on Thermal with 55mm optics. The device is ideally suited for use in combination with 3-7x magnifying scopes. The extremely short design of only 111mm makes a mounting on machine guns possible, where due to the design there is only little space available for an attachment. In combination with certain scopes, such as the ELCAN Specter, the device protrudes only 10cm beyond the optics.

    The robust aluminium housing offers good protection against drops and ensures consistently high precision even at different environmental temperatures.

    ONLY FOR OFFICIAL CUSTOMERS!
    VAIN VIRANOMAISASIAKKAILLE!
    TIEDUSTELUT INFO@PAUTAC.FI
  • 9 500,00 

    The TigIR-Z is currently the lightest and smallest thermal imaging device with 55mm optics. No other device reaches a range (standing man) of 3000m with such a short overall length of only 111mm. These small dimensions could only be achieved by developing a specially folded eyepiece optics. This allows to use the device in front of different spotting scopes (3-7x) etc. without loss of quality. Since the entire housing is made of highly stable aluminium and the objective optics are athermal, the TigIR has outstanding precision even under extreme temperature conditions. The housing surface is hard anodized and coated with a scratch-resistant ceramic lacquer. Thus, the TigIR defies even hard knocks in rough environments, yet weighs only around 527g, making it lighter than any other comparable device. 

  • Expandable with attachment lens to 4km range.

    Andres Industries latest thermal imaging attachment is the PumIR. With a total weight of less than 300g and a length of just over 10cm, it is certainly much smaller than the TigIR, but in combination with the appropriate attachment lens, the device even has a 30% higher range of 4km.

    Especially this long range combination with a weight clearly below 500g is unique in its compactness worldwide. Due to its low profile design, it is well usable with tactical scopes that have a reflex sight, such as the 4×32 ACOG with RMA from Trijicon. Of course, the PumIR series also has all the popular features of thermal imagers developed by Andres Industries.

    ONLY FOR OFFICIAL CUSTOMERS!
    VAIN VIRANOMAISASIAKKAILLE!
    TIEDUSTELUT INFO@PAUTAC.FI
  • Expandable with attachment lens to 4km range.

    Andres Industries latest thermal imaging attachment is the PumIR. With a total weight of less than 300g and a length of just over 10cm, it is certainly much smaller than the TigIR, but in combination with the appropriate attachment lens, the device even has a 30% higher range of 4km.

    Especially this long range combination with a weight clearly below 500g is unique in its compactness worldwide. Due to its low profile design, it is well usable with tactical scopes that have a reflex sight, such as the 4×32 ACOG with RMA from Trijicon. Of course, the PumIR series also has all the popular features of thermal imagers developed by Andres Industries.

  • The TILO-6MA™ is a particularly robust military and police version of the TILO series. In accordance with the special requirements of naval units, the housing has been milled completely from aluminum (AE), thus offering the following additional features:

    • Waterproof up to 20m
    • Bayonet adapter is part of the aluminium housing, therefore better precision and repeatability when used as clip-on thermal
    • Higher impact strength
    • Made of salt water resistant aluminum
    ONLY FOR OFFICIAL CUSTOMERS!
    VAIN VIRANOMAISASIAKKAILLE!
    TIEDUSTELUT INFO@PAUTAC.FI
  • The TILO-6™ is Andres Industries new flagship in the field of thermal imaging. With its 640×512 pixel sensor resolution it achieves twice the range of the TILO-3Z+™ and a thermal resolution of <40mK, the Z+ leaves nothing to be desired.

    ONLY FOR OFFICIAL CUSTOMERS!
    VAIN VIRANOMAISASIAKKAILLE!
    TIEDUSTELUT INFO@PAUTAC.FI
  • 9 500,00 

    The TILO-6Z+A™ is a particularly robust version of the TILO series. The housing has been milled completely from aluminum (AE), thus offering the following additional features:

    • Waterproof up to 20m
    • Bayonet adapter is part of the aluminium housing, therefore better precision and repeatability when used as clip-on thermal
    • Higher impact strength
    • Made of salt water resistant aluminum
  • 8 500,00 

    The TILO-6™ is Andres Industries new flagship in the field of thermal imaging. With its 640×512 pixel sensor resolution it achieves twice the range of the TILO-3Z+™ and a thermal resolution of <40mK, the Z+ leaves nothing to be desired.

  • 310,00 

    Although the civilian versions of the TigIR™  were developed as clip-ons for cameras and spotting scopes, they can also be used as handheld instruments with the lightweight magnifier eyepiece. With the digital zoom, different levels of magnifications can be achieved (2x, 2,5x, 5x, 10x und 15x). Due to AI image processing, the image rarely “pixels” even at high digital magnification.

  • 100,00 

    Compact pouch made of Cordura® in the optimal size to carry a TigIR™ including batteries or other small and medium-sized items securely and comfortably. The robust PALS/MOLLE panel on the backside offers modular and versatile attachment options, e. g. on a belt, backpack or chestrig.  Thanks to the magnetic quick-release fastener, you can have your most important gear at hand in seconds.

  • 210,00 

    With the ELCAN adapter, the TILO can be mounted in front of the ELCAN in just a few seconds.

    Greater precision can be guaranteed because the new adapter has made the connection more rigid. For these reasons, the repeatability has also increased.

  • 100,00 

    A headband can also be used instead of the helmet adapter. Since this can be moved freely on the head the adjustment is much easier. It works like the standard helmet adapter, but is attached to a standard headband.

    Suitable for all TILO models.

    Note: If you want to use the helmet adapter with a TILO-MA™, please indicate this when ordering.

  • 100,00 

    Adapter is suitable for ballistic helmets. The Shroud remains free to attach residual light amplifier night vision devices. By operating the release lever, the TILO™ can be removed within one second.

    Suitable for all TILO devices.

    Note: If you want to use the helmet adapter with a TILO-MA™, please indicate this when ordering.

  • 1 350,00 

    With the Red Dot Flipper (RDF), the TILO-6M(A) can also be used in front of a reflex sight.

    ONLY FOR OFFICIAL CUSTOMERS!
    VAIN VIRANOMAISASIAKKAILLE!
    TIEDUSTELUT INFO@PAUTAC.FI
  • 210,00 

    The TILO™ Rusan adapter from Andres Industries allows you to connect the Rusan adapter to the TILO™. With the Rusan adapter you are able to connect night vision optics e.g. with spotting scopes.

  • 510,00 

    ERATAC mounting rails are precisely milled from high-strength aluminium. The adjustability of the lever enables a secure hold on rails and repeatable mounting and setting down of scopes and attachments, for example. With adapter plate the distance of the optical axis of the scope and TigIR or PumIR can be adjusted.