Valikko Sulje

Varustekiskot ja tarvikkeet

Showing 1–20 of 47 results

  • KRG C-4 Barrel Shroud Rail

    KRG C-4 Barrel Shroud Rail

    170,00 €

    Now you can add a top rail to the C-4 Barrel Shroud. Offered in three lengths, which correspond specifically to each of the three C-4 barrel shrouds. Perfect for adding clip-on night vision, top mounted bi-pod, or a prism unit for ELR shooting. Comes with required mounting screws.

  • KRG C-4 Forend Side Weights

    KRG C-4 Forend Side Weights

    300,00 €

    Add weight to the forend of your C-4 Chassis. The Forend Side Weights can be added to the right and/or left side of the C-4 forend for better balance and easier followup shots. Two weights can be added to either side of the C-4 forend for maximum recoil dampening.

    Ships as a set of two.

  • KRG C-4 Forend Weight

    KRG C-4 Forend Weight

    200,00 €

    C-4 Forend Weight can be added to the C-4 forend for better balance and easier followup shots. Up to two Forend Weights may be mounted inside recessed channel.

  • KRG C-4 Rear Weight

    KRG C-4 Rear Weight

    190,00 €

    Add weight to the backend of your C-4 Chassis. The Rear Weight can be added to the right and/or left side of the C-4 backend for better balance and easier followup shots. Also the weight can be mounted under the right grip panel inside the pocket.

  • KRG Integrated Night Vision Rail (INVR)

    KRG Integrated Night Vision Rail (INVR)

    400,00 €

    Integrated Night Vision Rail (INVR): This Night Vision Rail mounts in the barrel channel of the Whiskey-3, X-ray, or TRG-22/42 chassis and provides mounting options…

  • JAE Adjustable Bag Rider

    JAE Adjustable Bag Rider

    230,00 €

    ADJUSTABLE BAG RIDER allows you to set your angle and position to increase your stability while shooting prone or from a bench.

  • JAE Buttstock Spacer

    JAE Buttstock Spacer

    130,00 €

    Machined Butt Pad Spacer (1/4″ thick) to increase & personalize your LOP. Depending on how many Butt Spacers you use together, you may need longer bolts.

  • JAE M-LOK ARCA Rail 700

    JAE M-LOK ARCA Rail 700

    250,00 €

    Uniquely designed M-LOK ARCA RAIL runs the full length of the forend, plus extends 2″ past the front of the chassis (ARCA-2) or 6″ past the front of the chassis (ARCA-6).

  • JAE M-LOK Picatinny Rail

    JAE M-LOK Picatinny Rail

    120,00 €

    M-LOK Picatinny Rails (in sizes 2″, 4″, or 8″) attach to the M-LOK FLUSH RAIL, M-LOK ARCA RAILS, and to the M-LOK SIDE RAIL ADAPTERS and allow you to attach Bipods or other 1913 PICATINNY RAIL Spec Accessories.

  • JAE Night Vision Mount

    JAE Night Vision Mount

    350,00 €

    Night Vision Mount w/ 20 MOA Integral Rail for mounting Night Optics. Fits: All JAE-700 G4 Chassis (Original to G4) (Does NOT fit the JAE-100…

  • JAE Off Hand Rest

    JAE Off Hand Rest

    150,00 €

    Hand Rest w/ Integral Picatinny Rail allows for attaching Monopod on rear and also adds support for non-trigger hand.

  • KRG ARCA Rail

    KRG ARCA Rail

    200,00 €

    The KRG Arca rail gives you Arca-Swiss rail functionality for your KRG Whiskey-3, X-ray, or Bravo chassis. It’s low profile and light weight and mounts to the bottom of the forend without being obtrusive. There are limitless possibilities for mounting and positioning acessories to your chassis with the Arca rail. Attach your bipod or our Barrier Multi-tool to our Arca Clamp or another brand’s clamp and quickly position your item anywhere along the rail, for example. You can easily remove or re-position for the next stage or even during a stage.

    Fits: KRG Whiskey-3, X-ray, and Bravo chassis.

    Restrictions: Use as many fasteners as possible to mount the Arca rail to maintain rigidity. The Arca Rail does not work on 180-Series chassis.

  • KRG ARCA Rail Enclosed Forend

    KRG ARCA Rail Enclosed Forend

    600,00 €

    ARCA Rail Enclosed Forend: A competition focused version of our original Enclosed Forend for your KRG chassis. Includes an integral ARCA rail and M-Lok slots for your mounting needs. The top rail has been removed providing a comfortable grip for your offhand and just like the original it extends approximately 4″ further than the standard forend offering plenty of real estate for bipod and other attachments.

    Since it’s best to keep your scope as close to the boreline as possible, the ARCA Enclosed Forend has an area cut out over the barrel, which allows for the scope objective to sit low in a natural position.

    Fits: Whiskey-3, X-ray, and Bravo Chassis

  • KRG ARCA Rail Heavy

    KRG ARCA Rail Heavy

    300,00 €

    The KRG Arca Rail Heavy gives you Arca-Swiss rail functionality for your KRG Whiskey-3, X-ray, or Bravo chassis, plus it adds an extra 1lbs 3oz for a steady position to get you back on target fast at your next match. There are tons of possibilities for mounting and positioning accessories to your chassis with this rail. Attach your bipod or our Barrier Multi-tool to our Arca Clamp and quickly position your item anywhere along the rail. You can easily remove or re-position for the next stage or even during a stage.

    Fits: KRG Whiskey-3, X-ray, and Bravo chassis.

    Restrictions: Use as many fasteners as possible to mount the rail to maintain rigidity. Does not work on 180-Series chassis. Does not ship with fasteners for use with the Enclosed Forend.

  • KRG Arca Spigot Mount

    KRG Arca Spigot Mount

    300,00 €

    The Arca Spigot Mount is a modified version of the standard KRG Spigot Mount. It has an Arca rail cut into it so you can use all the various Arca clamps and items right on your KRG Spigot Mount. The Spigot Mount is one of our most popular accessories as it allows all kinds of mounting options for your Whiskey-3, X-ray, or Bravo chassis from NV mounts to sling mounts and more. Like the standard Spigot, it features a bolt-on installation into the slot at the front of the chassis.

    Furthermore, the Arca Spigot can move a bipod closer to the bore by about an inch and further toward the muzzle approximately five inches from the regular chassis forend.

  • KRG Rail Enclosed Forend

    KRG Rail Enclosed Forend

    600,00 €

    ARCA Rail Enclosed Forend: A competition focused version of our original Enclosed Forend for your KRG chassis. Includes an integral ARCA rail and M-Lok slots for your mounting needs. The top rail has been removed providing a comfortable grip for your offhand and just like the original it extends approximately 4″ further than the standard forend offering plenty of real estate for bipod and other attachments.

    Since it’s best to keep your scope as close to the boreline as possible, the ARCA Enclosed Forend has an area cut out over the barrel, which allows for the scope objective to sit low in a natural position.

    Fits: Whiskey-3, X-ray, and Bravo Chassis

  • MDT 20 MOA Scope Base

    MDT 20 MOA Scope Base

    90,00 €

    MDT’s Scope Base Picatinny Rails are a precise and reliable solution when it comes to mounting a scope on your bolt action rifle.

  • MDT ACC Interior Forend Weights (5 pack)

    MDT ACC Interior Forend Weights (5 pack)

    220,00 €

    Add internal weight to you MDT ACC Chassis.

  • MDT ACC Control Bridge

    MDT ACC Control Bridge

    140,00 €

    The MDT Control Bridge is an accessory designed for the ACC Elite chassis. It is intended to be bolted onto the top of the forend, serving as a mirage mitigation device and also functioning as a barrel cover when reaching over the forend to enhance recoil control.

  • MDT ACC Mirage Shield

    MDT ACC Mirage Shield

    190,00 €

    The Mirage Shield/NV Bridge is a dual purpose, precision machined, add-on accessory for the MDT ACC chassis. While the main purpose of the mirage shield is to help mitigate mirage and maintain a clear view of your target in sustained strings of fire, it also provides the ability for hunters and operators to attach a night vision optic to their system. For competitors, the mirage shield also gives you better available surface to control the front of your rifle, without having to grab a hot barrel.