Menu Close

Rails and accessories

Showing 1–20 of 22 results

  • Sale!MDT 20 MOA Scope Base

    MDT 20 MOA Scope Base

    Original price was: 90,00 €.Current price is: 50,00 €.

    MDT’s Scope Base Picatinny Rails are a precise and reliable solution when it comes to mounting a scope on your bolt action rifle.

  • MDT ACC Control Bridge
    Sold out!

    MDT ACC Control Bridge

    140,00 €

    The MDT Control Bridge is an accessory designed for the ACC Elite chassis. It is intended to be bolted onto the top of the forend, serving as a mirage mitigation device and also functioning as a barrel cover when reaching over the forend to enhance recoil control.

  • MDT ACC Mirage Shield
    Sold out!

    MDT ACC Mirage Shield

    190,00 €

    The Mirage Shield/NV Bridge is a dual purpose, precision machined, add-on accessory for the MDT ACC chassis. While the main purpose of the mirage shield is to help mitigate mirage and maintain a clear view of your target in sustained strings of fire, it also provides the ability for hunters and operators to attach a night vision optic to their system. For competitors, the mirage shield also gives you better available surface to control the front of your rifle, without having to grab a hot barrel.

  • MDT ACC NV Bridge
    Sold out!

    MDT ACC NV Bridge

    140,00 €

    The MDT ACC Elite NV Bridge is a Picatinny rail that securely attaches to the top of the forend, providing versatile mounting options for night vision, thermal imaging, prism/periscope, or other devices. Additionally, the NV Bridge assists in reducing mirage effects.

  • Sale!MDT Buttstock Weight

    MDT Buttstock Weight

    Original price was: 70,00 €.Current price is: 30,00 €.

    Add weight to your buttstock to decrease recoil and balance your rifle.

    This weight mounts in the lower pocket of the MDT ESS, ACC, and SRS V5 buttstocks. The weight and its hardware will add 0.65 lb to your rifle system. Attaching near the bottom of the stock will move your balance point rearward significantly.

    To install, remove the buttpad assembly, slide the weight into the lower pocket, attach with included screws and reinstall the buttpad assembly. The buttstock weight is a nice compliment to MDT M-LOK Exterior Forend Weights.

  • MDT ESS Foregrip ARCA Adapter
    Sold out!

    MDT ESS Foregrip ARCA Adapter

    60,00 €

    Use your ESS Foregrip to attach to an ARCA adapter.

    Mil-spec Type III hard-black anodized aluminum ARCA adapters that attach over-top-of MDT ESS foregrips. Features an angled profile, that fits inside of the existing foregrip to allow infinite adjustment of Arca accessories along the 5” section. Up your ESS’ performance by quickly being able to shift bipods rearwards for awkward shots, or adapting to a tripod with ease and speed.

  • MDT LSS-XL GEN2 NV hood
    Sold out!

    MDT LSS-XL GEN2 NV hood

    170,00 €

    NV Hood oversize for LSS-XL Gen2

  • Sale!MDT M Lok ARCA RSS adapters

    MDT M-LOK ARCA Rail

    Original price was: 60,00 €.Current price is: 30,00 €.

    Securely attach your rifle to an ARCA mount with the MDT M-LOK ARCA Rail.

    Arca Swiss adapters have become the standard for attaching rifles to tripods, bipods and support gear. Need to attach your MDT Chassis rifle to an ARCA interface? Use our M-LOK ARCA Rail.

    The MDT M-LOK ARCA Rail is Mil-spec Type III hard-black anodized. Available as a standard, flat profile that can adapt to most M-LOK compatible surfaces or as an angled profile that is designed to match the underside profile of the MDT LSS-XL Gen2. Available in multiple lengths.

  • MDT M-LOK Baker Wings
    Sold out!

    MDT M-LOK Baker Wings

    250,00 €

    The MDT M-LOK Baker Wings were designed and tested by Keith Baker, an MDT Prostaff shooter and multi-national level PRS match winner. These wings are designed to provide the shooter with more stability when shooting off of an unstable position and utilizing a front bag, as well as providing more control surfaces for the shooter’s support hand. In short, these wings will help you, a.) control the tracking of the recoil on your rifle, b.) maintain better control on the front of your rifle and c.) provide a wide and flat contact surface on a bag!

  • MDT M-LOK Data Card Holder
    Sold out!

    MDT M-LOK Data Card Holder

    70,00 €

    Every second counts, keep your ballistic data in perfect eyeshot when you need it most.

    The MDT M-LOK Data Card Holder has an adjustable neck design allowing you to perfectly position your data for effortless readability.

  • MDT M-LOK Exterior Forend Weights (Pair)
    Sold out!

    MDT M-LOK Exterior Forend Weights (Pair)

    70,00 €

    Perfect for adding weight and balance to your rifle.

    Adding weight to a rifle can cut down on recoil, allow one to self-spot their shots and balance their rifle. These weights mount on to the exterior of any chassis or stock that is M-LOK compatible. They mount using standard hardware and M-LOK T-nuts, meaning that you can install and remove them as necessary on your system. Each weight features a QD flush cup to accommodate a sling.

    A pair of weights and hardware will add 0.78 lb to your chassis/stock.

    Perfect for adding weight and balance to your rifle.

  • MDT M-LOK Multi-Caliber Spare Round Holder
    Sold out!

    MDT M-LOK Multi-Caliber Spare Round Holder

    60,00 €

    Have you ever run out of ammo mid-stage? Dropped mag or feeding issues, or simply need the extra round or two available when it counts?

    Store an additional 2 rounds on the side of your rifle with the MDT M-LOK Multi-Caliber Spare Round Holder.

  • MDT XRS Chassis System Enclosed Forend
    Sold out!

    MDT XRS Chassis System Enclosed Forend

    200,00 €

    The brand new MDT XRS Enclosed Forend replaces your factory XRS Chassis System forend with full-length ARCA and additional M-LOK slots.

  • MDT XRS Forend Weight
    Sold out!

    MDT XRS Forend Weight

    100,00 €

    Add weight to the front section (forend) of your MDT XRS Chassis System to achieve optimal balance and help reduce felt recoil.

  • Sale!Tier One Blaser R8 Picatinny adapter

    Tier One Blaser R8 Picatinny adapter

    Original price was: 80,00 €.Current price is: 40,00 €.

    Precision machined from aircraft grade 7000 series aluminium and hard anodised to military specifications, the Tier-One Blaser Picatinny rail adapter allows for rapid and secure…

  • Sale!Tier One UIT Picatinny adapter

    Tier One UIT Picatinny adapter

    Original price was: 60,00 €.Current price is: 30,00 €.

    Tier-One picatinny adapter for UIT rail.

  • Sale!Tier-One Tikka T3 Scope Base

    Tier-One Tikka T3 Scope Base

    Original price was: 100,00 €.Current price is: 50,00 €.

    Tier One Picatinny rails are precision manufactured on 5 axis CNC machinery, going from round bar stock to the finished item in one operation. By doing this, there is no accuracy loss due to re-setting for different operations.

  • Rusan Q-R Adapter M52x0,75

    Rusan Q-R Adapter M52x0,75

    200,00 €

    RUSAN quick-release adapter  for mounting the night vision device on a primary optics.

    The Rusan QR adapter is the perfect choice for mounting clip on devices such as the Infiray Clip-C or any other device with an M52x.075 thread. Quick and easy to use quick-release adapter for mounting the night vision device on a primary optic with thread M52x0,75.
    The outer diameter of the primary optics is relevant for the correct choice of the clamping adapter.

  • Vision Modular M-LOK Weights (Pair)
    Sold out!

    Vision Modular M-LOK Weights (Pair)

    80,00 €
    Pair of Modular M-LOK weights for Vision Competition Frontguard.
  • Vision Picatinny Rail for Top Cover
    Sold out!

    Vision Picatinny Rail for Top Cover

    70,00 €

    The vision short picatinny rail is designed to fit vision chassis night vision bridges perfectly but can also be used as a shorter picatinny rail for other top covers with the same mounting system, such as the vision modular flat top for standard forend and ai long top cover.