Menu Close

Rails and accessories

Showing 21–40 of 46 results

  • MDT Buttstock Weight

    MDT Buttstock Weight

    70,00 €

    Add weight to your buttstock to decrease recoil and balance your rifle.

    This weight mounts in the lower pocket of the MDT ESS, ACC, and SRS V5 buttstocks. The weight and its hardware will add 0.65 lb to your rifle system. Attaching near the bottom of the stock will move your balance point rearward significantly.

    To install, remove the buttpad assembly, slide the weight into the lower pocket, attach with included screws and reinstall the buttpad assembly. The buttstock weight is a nice compliment to MDT M-LOK Exterior Forend Weights.

  • MDT ESS Foregrip ARCA Adapter
    Sold out!

    MDT ESS Foregrip ARCA Adapter

    60,00 €

    Use your ESS Foregrip to attach to an ARCA adapter.

    Mil-spec Type III hard-black anodized aluminum ARCA adapters that attach over-top-of MDT ESS foregrips. Features an angled profile, that fits inside of the existing foregrip to allow infinite adjustment of Arca accessories along the 5” section. Up your ESS’ performance by quickly being able to shift bipods rearwards for awkward shots, or adapting to a tripod with ease and speed.

  • MDT ESS Scope Base

    MDT ESS Scope Base

    120,00 €

    Install your optics seamlessly on your ESS chassis system bolt action rifle with our 20 MOA ESS Scope Base Rails. 

  • MDT LSS-XL GEN2 NV hood
    Sold out!

    MDT LSS-XL GEN2 NV hood

    170,00 €

    NV Hood oversize for LSS-XL Gen2

  • MDT M Lok ARCA RSS adapters

    MDT M-LOK ARCA Rail

    60,00 €

    Securely attach your rifle to an ARCA mount with the MDT M-LOK ARCA Rail.

    Arca Swiss adapters have become the standard for attaching rifles to tripods, bipods and support gear. Need to attach your MDT Chassis rifle to an ARCA interface? Use our M-LOK ARCA Rail.

    The MDT M-LOK ARCA Rail is Mil-spec Type III hard-black anodized. Available as a standard, flat profile that can adapt to most M-LOK compatible surfaces or as an angled profile that is designed to match the underside profile of the MDT LSS-XL Gen2. Available in multiple lengths.

  • MDT M-LOK Baker Wings

    MDT M-LOK Baker Wings

    250,00 €

    The MDT M-LOK Baker Wings were designed and tested by Keith Baker, an MDT Prostaff shooter and multi-national level PRS match winner. These wings are designed to provide the shooter with more stability when shooting off of an unstable position and utilizing a front bag, as well as providing more control surfaces for the shooter’s support hand. In short, these wings will help you, a.) control the tracking of the recoil on your rifle, b.) maintain better control on the front of your rifle and c.) provide a wide and flat contact surface on a bag!

  • MDT M-LOK Data Card Holder

    MDT M-LOK Data Card Holder

    70,00 €

    Every second counts, keep your ballistic data in perfect eyeshot when you need it most.

    The MDT M-LOK Data Card Holder has an adjustable neck design allowing you to perfectly position your data for effortless readability.

  • MDT M-LOK Exterior Forend Weights (Pair)

    MDT M-LOK Exterior Forend Weights (Pair)

    70,00 €

    Perfect for adding weight and balance to your rifle.

    Adding weight to a rifle can cut down on recoil, allow one to self-spot their shots and balance their rifle. These weights mount on to the exterior of any chassis or stock that is M-LOK compatible. They mount using standard hardware and M-LOK T-nuts, meaning that you can install and remove them as necessary on your system. Each weight features a QD flush cup to accommodate a sling.

    A pair of weights and hardware will add 0.78 lb to your chassis/stock.

    Perfect for adding weight and balance to your rifle.

  • MDT M-LOK Multi-Caliber Spare Round Holder

    MDT M-LOK Multi-Caliber Spare Round Holder

    60,00 €

    Have you ever run out of ammo mid-stage? Dropped mag or feeding issues, or simply need the extra round or two available when it counts?

    Store an additional 2 rounds on the side of your rifle with the MDT M-LOK Multi-Caliber Spare Round Holder.

  • MDT M-LOK Picatinny rails

    MDT M-LOK Picatinny rails

    45,00 €

    Anodized aluminum Picatinny rails for attaching accessories to M-LOK compatible hand guards and forends.

  • MDT M-LOK QD Mount

    MDT M-LOK QD Mount

    40,00 €

    Anodized aluminum QD adaptor for attaching accessories to M-LOK compatible hand guards and forends.

  • MDT Rear Bag Rider

    MDT Rear Bag Rider

    60,00 €

    Increase the capabilities of your MDT buttstock.

    The Rear Bag Rider offers an end user an additional 5″ to interface with a rear bag, or compliment multiple shooting positions. A flat, horizontal surface aids in linear recoil and the rounded profile reduces snagging on bags and gear. Mil-Spec Type III hard-black anodized aluminum. Attaches to M-LOK compatible and legacy buttstocks.

  • MDT XRS Chassis System Enclosed Forend

    MDT XRS Chassis System Enclosed Forend

    200,00 €

    The brand new MDT XRS Enclosed Forend replaces your factory XRS Chassis System forend with full-length ARCA and additional M-LOK slots.

  • MDT XRS Forend Weight

    MDT XRS Forend Weight

    100,00 €

    Add weight to the front section (forend) of your MDT XRS Chassis System to achieve optimal balance and help reduce felt recoil.

  • KRG NV Cap, Backbone Mounted

    KRG NV Cap, Backbone Mounted

    330,00 €

    If you want an NV mount on your KRG chassis and you don’t have a KRG Spigot Mount, this may be for you. It mounts…

  • KRG NV Mount Cap (NVMC) Kit for Spigot

    KRG NV Mount Cap (NVMC) Kit for Spigot

    370,00 €

    NV Mount Cap Kit replaces the IMUNS kit. It installs onto the spigot mount, giving a top rail mount option for mounting night vision devices…

  • ROME Barricade System

    ROME Barricade System

    230,00 €

    ROME Barricade System is built to maximize the barricade stop surface without creating a snag hazard on the front of the rifle. With the numerous aggressive teeth on the front surface of the ROME Barricade System ensure a solid bite into the barricade.

  • ROME Arca Swiss rail interface with knob

    ROME Arca Swiss rail interface with knob

    230,00 €

    ROME Arca Swiss rail interface with knob enables fast, easy attachment of a tripod, bipod, or monopod to a rifle with a Picatinny type accessory rail on the underside of its forearm.

  • ROME Detachable multifunction carry handle
    Sold out!

    ROME Detachable multifunction carry handle

    200,00 €

    ROME Detachable multifunction carry handle provide multiple attachment points for different accessories and ergonomic handle of the rifle.

  • Tier One Blaser R8 Picatinny adapter

    Tier One Blaser R8 Picatinny adapter

    80,00 €

    Precision machined from aircraft grade 7000 series aluminium and hard anodised to military specifications, the Tier-One Blaser Picatinny rail adapter allows for rapid and secure…