Detailed info

The Whiskey-3 Gen 7 Pro Body/Forend:

The forend and backbone are a one piece monolithic construction milled from a single billet for maximum stiffness and while maintaining light weight.
Integrated ARCA Rail compatible with KRG Δ-Lug and R-Lock.
M-Lok slot positions at the 3, 6, & 9 o’clock. Ships with one M-Lok QD mount.
Large polymer mag well surround can be adjusted fore & aft for better mag fitment.
Includes mounting points for our Two Round Quiver on either side of the magwell.
Utilizes radius bedding, which is CNC’d into aluminum backbone for consistent contact between action and chassis.
Tikka T3 inlets include an integrated hardened stainless steel recoil lug.
Rem 700 version can accommodate most large aftermarket recoil lugs like the Badger Ordnance lug without any or with only slight modification.
Designed for 5 or 10 round AICS magazines (with or without front spacer plate in T3, with spacer plate only in Rem 700 unless you have a modified action); Rem 700 LA uses 3.850″ length AICS pattern magazines or 3.715″ length mags with the included magwell spacer.
Accepts barrel contours up to 1.25″ straight cylinder, however the clearance will be minimal.

Trigger Guard/Mag catch:

Trigger guard assembly can be adjusted fore & aft for better mag fitment.
Rem 700 version will accept most aftermarket triggers though some may require modifications to the trigger or chassis.
Mag catch is our low profile version which reduces snags while still providing excellent ergonomics and control.

Folding Mechanism (not applicable for fixed stock):

Hinge mechanism is user configurable for left or right side folding.
Main latch uses proven tapered lever style lockup.
Secondary latch locks buttstock in folded position.
Spring loaded plungers lock automatically.
Tapered design of primary latch allows tight lockup through wear of the system.
Latch components made of hardened stainless steel and nitrided high strength chromoly steel.

Cheekpiece:

Infinitely adjustable within range (1” travel).
Cheekpiece thumbscrew can be swapped to the left or right side.
Includes a simple feature to make the cheekpiece return to the exact height you set it.
Cheekpiece can be moved forward and backward as well as side to side with several mounting positions.
Cheekpiece made of polymer to not transmit heat to or away from your face.

Length of Pull:

Adjustable in ¼” increments with 1 3/4” of adjustment range.
LOP range varies slightly between versions but is roughly 13.3” to 15”.
Uses cam lock and thumbscrew to ensure a solid fit.

Buttstock:

CNC milled from billet aluminum.
Entire buttstock assembly can be mounted to KRG chassis X-ray, Bravo, 180-Xray for CZ455, and also Sako TRG-22/42 rifle.

Buttpad:

Moves vertically to set positions within range.
Tool-less adjustable.
Buttpad is Remington 700 pattern so user can install aftermarket pre-fit pads.
Buttpad can tilt 15 degrees to each side (as if looking directly from the rear down the bore).

Mounting features for slings, monopods, etc:

Buttstock has QD sling cup on each side and provisions for other mounting options.
Buttstock includes bag rider which can be replaced with included picatinny rail.
Forend has M-Lok mounting positions at 3,6, & 9.

Optional Accessories:

Large selection of accessories from NV Caps to Weight Kits.
ALL STOCKS COME WITH ONE MOE L2 RAIL.

Materials/Finishes:

Most aluminum parts are hard anodized (Type III).
All fasteners are stainless steel with black oxide coating.
Steel parts are salt bath nitrided or stainless steel.
Grip panels are injection molded reinforced polymer.

NOTES

*Actions with trigger hangers will not work without mods to the chassis, hanger, or both.

*We do not guarantee proper feeding with the KRG/Tikka T3/6.5PRC combo.

*The Tikka inlet accepts T3, T3x, and CTR versions, however slight mods may be required on the trigger-guard for the T3 TAC A1 to function properly. Tikka rifles accept AICS pattern mags with the exception of the Magpul AICS polymer mags.

*We do not guarantee the proper function of Vudoo V22 or Bergara B-14r (rimfire) magazines in our chassis. It may be necessary to install and fit our Extended Mag Catch for proper feeding.

*All of our chassis take AICS magazines with nothing extra needed, the magazine is not included.

*Remington 700 long action chassis take 3.850″ (CIP) length AICS pattern magazines or 3.715″ AICS mags with included spacer.

Lisätiedot

Paino	2000 g (gramma)
Mitat	78 × 16 × 8 cm (senttimetri)

Ostoskori

Ostoskori

KRG Whiskey-3 Pro Chassis

Detailed info

Lisätiedot